List of practice Questions

Jantar Mantar is an assembly of stone-built astronomical instruments, designed to be used with naked eyes. A visit to Jantar Mantar can help students to learn how______.

The first country to have entered the Mars orbit in its first attempt is:

The project of 'NASA' targeting the landing of first woman/women astronaut's on moon is known as:

Which of the following is NOT true: The turning points of the graph of a function:

Match List-I with List-II.

List-I		List-II
(A)	Thappad	(I)	Women's bodies and commercial gains
(B)	Mimi	(II)	Quality education for all
(C)	Black	(III)	Domestic violence and dignity
(D)	Hichki	(IV)	Right to a dignified life and knowledge

Choose the correct answer from the options given below:

In the story 'Idgah' the protagonist Hamid buys a_____ for_____ from the fair.

Who is the first female Indian scientist to receive a PhD degree in a scientific discipline?

In the film, 'Chak De India', which of the following themes was not addressed?

The stories by Premchand primarily deal with:
A. Challenges faced by children
B. issues related to women
C. struggles of the professional class
D. struggles of the rural poor
E. the character of villages in medieval India
Choose the most appropriate answer from the options given below:

The central theme of the Hindi film. 'Dangal' is:

Tagore's alternate school 'Shantiniketan' did NOT promote:

Match List-I with List-II.

List-I (Dance)		List-II  (Artists)
(A)	Bharatnaryam	(I)	Savita Mehta
(B)	Odissi	(II)	Sitara Devi
(C)	Kathak	(III)	Yamini Krishnamurthy
(D)	Manipuri	(IV)	Sanjukta Panigrahi

Choose the correct answer from the options given below:

DD Gyan Darshan is an educational media initiative of Ministry of Education in collaboration with-
A. Ministry of Information and Broadcasting
B. Prasar Bharti
C. ISRO
D. IGNOU
E. Ministry of Information and Communication Technology
Choose the correct answer from the options given below:

Match List - I with List - II.

List - I	List -II
(A)Pipes are used to carry.	(I) By means of nut and Bolt
(B)Faces of flanges are machined at right angles to the axis of pipe	(II) For preventing leakage
(C)Gasket is used in between faces of two flanges.	(III) For perfect alignments
(D)Flanges with gasket in between are connected together.	(IV) water, oil, steam or gas etc. from one place to another place

Choose the correct answer from the options given below:

Match List - I with List - II.

List - I	List -II
(Assemblies)	(Number of parts used)
(A) Open Bearing	(I)  5
(B)Sleeve and cotter join	(II) 4
(C)Gib and cotter joint	(III) 3
(D)Turnbuckle	(IV) 2

Choose the correct answer from the options given below:

Match List - I with List - II.

List - I	List -II
(Details of collar stud)	(Standard dimension) (Where 'd' is nomial diameter of stud)
(A) Threaded length of nut end	(I)  d
(B)Diameter of collar	(II) 0.4 d
(C)Thickness of collar	(III) 1.5 d
(D)Length of metal end	(IV)  2 d+6

Choose the correct answer from the options given below:

Match List - I with List - II.
(Thread of P = Pitch, d= Actual depth and D=Theoretical depth)

List - I	List -II
(A) B.S.W. Thread	(I) d = 0.61 P
(B)Metric thread (internal)	(II) D = 0.96 P
(C)Metric thread (external)	(III) d = 0.54 P
(D) Square thread	(IV) D= 0.50 P

Choose the correct answer from the options given below:

Shape of oil hole in Bush Bearing is__________.

Choose the incorrect statement for Sleeve and cotter joint :

In Gib and cotter joint, if the thickness of cotter is 8 mm, then thickness of gib will be______.

Turnbuckle joint is not used in _____.

In flange pipe joint, both flanges with gasket in between them are connected together by____.

Match List - I with List - II.

List - I	List -II
(Solids)	(Their Features)
(A) Prism	(I) Base is a circle.
(B) Pyramid	(II) Two similar ends and rectangular faces.
(C) Cone	(III) Two circular faces and one curved surface.
(D) Cylinder	(IV) One base and slant triangular faces.

Choose the correct answer from the options given below:

Match List - I with List - II.

List - I	List -II
(Solids)	(Their Features)
(A)Angle of Line indicating Isometric lengths with base line	(I) \(15\degree\)
(B) Angle of line showing true lengths with base line.	(II) \(30\degree\)
(C) Angle between lines showing isometric lengths and true lengths.	(III) \(45\degree\)
(D) Angle of projectors with base line.	(IV) \(90\degree\)

Choose the correct answer from the options given below:

In conventional representation of external V-Thread, root is represented by _______ in its front view.