List of top Questions asked in CUET (UG)

Match List I with List II

List I	List II
(A) Modulation	(III) Superimposition of a signal on a high frequency wave
(B) Baseband signals	(IV) Band of frequencies representing the original signal
(C) Demodulation	(I) Retrieval of information from the carrier wave at the receiver
(D) Bandwidth	(II) Frequency range over which an equipment operates

Identify the logic operation carried out by the following circuit.

The height of a TV tower is 180 m. To what distance the transmission can be made from this tower, if the radius of earth is \(6.4 \times 10^6\) m?

In the figure, the potential difference between A and B is:

Match List I with List II

List I	List II
(A) Zener Diode	(II) Voltage Regulator
(B) LED	(III) Remote Control
(C) Rectifier	(IV) AC to DC
(D) Photo diode	(I) Detect optical signal

Which of the following statements is NOT correct:

The energy diagram of a hydrogen atom is given below. Arrange the wavelengths corresponding to different emissions in increasing order.

What will be the energy released in the fusion process of two lighter nuclei of masses \( m_1 \) and \( m_2 \) into a nucleus of mass \( M \)?

Match List I with List II

List I	List II
(A) Rn22286 → Po21884	(III) α particle
(B) Bi21483 → Po21484	(I) β− particle
(C) Th23490 → U23492	(I) β− particle
(D) Na2211 → Na2210	(II) β+ particle

Which of the following statements are correct?
A. Photoelectric current depends on the intensity of light.
B. The stopping potential is directly related to the maximum kinetic energy of electrons emitted, which is dependent on the intensity of incident radiation.
C. Photoelectric emission from a metal surface occurs due to absorption of a photon by an electron.
D. Photoelectric effect follows the law of conservation of energy.

Select the correct statement for nuclear force:

Linear magnification produced by a mirror is +1.5. What is the correct mirror and object position?

The correct curve between stopping potential \( V_0 \) and intensity of incident radiation \( I \) at constant frequency is:

The type of wavefront that emerges from a distant light source is:

A proton, a deuteron, an electron, and an \(\alpha\)-particle have the same energy. Their deBroglie wavelengths are \( \lambda_p \), \( \lambda_d \), \( \lambda_e \), and \( \lambda_{\alpha} \), respectively. Which of the following is correct?

Light is traveling from one medium to another medium as given in the options. In which of the following options total internal reflection will be possible?

A slit of width \(e\) is illuminated by light of wavelength \(\lambda\). What should be the value of \(e\) to obtain the first maximum at an angle of diffraction \(\frac{\pi}{3}\)?

A spherical air lens of radii \( R_1 = R_2 = 10 \, \text{cm} \) is cut from a glass (\(\mu = 1.5\)) cylinder as shown in the figure. Its focal length is \( f_1 \). If a liquid of refractive index \( \mu_2 \) is filled in the space, then the focal length of the liquid lens becomes \( f_2 \). Calculate \( f_1 \) and \( f_2 \). Choose the correct options from the following.

Match List I with List II

List I: Frequency Range	List II: Types of Waves
(I) 1 × 1016 − 3 × 1021 Hz	(D) γ-rays
(II) 1 × 109 − 3 × 1011 Hz	(B) Microwaves
(III) 1 × 108 − 5 × 1022 Hz	(A) X-rays
(IV) 5 × 105 − 109 Hz	(C) Radio waves

An astronomical telescope consists of an objective of focal length 50 cm and eyepiece of focal length 2 cm is focused on the moon so that the final image is formed at the least distance of distinct vision (25 cm). Assuming angular diameter of the moon as \( \frac{1}{2^\circ} \) at the objective, the angular size of image is:

An electromagnetic wave going through vacuum is described by \( E = E_0 \sin(kx - \omega t) \), \( B = B_0 \sin(kx - \omega t) \), then:

In Young's double slit experiment, yellow light of wavelength 640 nm produces fringes of width 0.8 mm. What will be the fringe width if the light source is replaced by another monochromatic source of wavelength 720 nm and the separation between the slits is made thrice?

A square loop of copper wire is pulled through a region of uniform magnetic field as shown. Rank the pulling forces \(F_A\), \(F_B\), \(F_C\), and \(F_D\) that must be applied to keep the loop moving with constant speed (\(\vec{v}\)):

When 100 V dc is applied across a solenoid, a current of 1 A flows in it. When 100 V ac is applied across the same solenoid the current drops to 0.5 A. If the frequency of the ac source is 50 Hz, the impedance and inductance of the solenoid are: