Statement I: When a Si sample is doped with Boron, it becomes P type and when doped by Arsenic it becomes N-type semi conductor such that P-type has excess holes and N-type has excess electrons.
Statement II: When such P-type and N-type semi-conductors, are fused to make a junction, a current will automatically flow which can be detected with an externally connected ammeter.
In the light of above statements, choose the most appropriate answer from the options given below
Statement II: When such P-type and N-type semi-conductors, are fused to make a junction, a current will automatically flow which can be detected with an externally connected ammeter.
In the light of above statements, choose the most appropriate answer from the options given below
- Statenent I is correct but statement II is incorrect
- Both Statement I and Statement II are incorrect
- Statenent I is incorrect but statement II is correct
- Both Statenent I and statement II are correct
The Correct Option is A
Solution and Explanation
The correct option is(A): Statenent I is correct but statement II is incorrect.
When P-N junction is formed an electric field is generated form N-side to P-side due to which barrier potential arises & majority charge carrier can not flow through the junction due to barrier potential so current is zero unless we apply forward bias voltage.
Top Questions on Semiconductor electronics: materials, devices and simple circuits
- A voltage regulating circuit consisting of a Zener diode having breakdown voltage of $10\,\text{V}$ and maximum power dissipation of $0.4\,\text{W}$ is operated at $15\,\text{V}$. The approximate value of protective resistance in this circuit is ___ $\Omega$.
- JEE Main - 2026
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- In hydrogen atom spectrum, (R → Rydberg's constant)
A. the maximum wavelength of the radiation of Lyman series is 4/3R
B. the Balmer series lies in the visible region of the spectrum
C. the minimum wavelength of the radiation of Paschen series is 9/R
D. the minimum wavelength of Lyman series is 5/4R
Choose the correct answer from the options given below :- JEE Main - 2026
- Physics
- Semiconductor electronics: materials, devices and simple circuits
Assuming in forward bias condition there is a voltage drop of \(0.7\) V across a silicon diode, the current through diode \(D_1\) in the circuit shown is ________ mA. (Assume all diodes in the given circuit are identical)
- JEE Main - 2026
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- The correct truth table for the given input data of the following logic gate is:
- JEE Main - 2026
- Physics
- Semiconductor electronics: materials, devices and simple circuits
For the given logic gate circuit, which of the following is the correct truth table ?
- JEE Main - 2026
- Physics
- Semiconductor electronics: materials, devices and simple circuits
Questions Asked in JEE Main exam
- The system of linear equations
$x + y + z = 6$
$2x + 5y + az = 36$
$x + 2y + 3z = b$
has- JEE Main - 2026
- Matrices and Determinants
- The displacement of a particle executing simple harmonic motion with time period \(T\) is expressed as \[ x(t)=A\sin\omega t, \] where \(A\) is the amplitude of oscillation. If the maximum value of the potential energy of the oscillator is found at \[ t=\frac{T}{2\beta}, \] then the value of \(\beta\) is ________.
- JEE Main - 2026
- Waves and Oscillations
- A complex number 'z' satisfy both \(|z-6|=5\) & \(|z+2-6i|=5\) simultaneously. Find the value of \(z^3 + 3z^2 - 15z + 141\).
- JEE Main - 2026
- Algebra
In the given figure, the blocks $A$, $B$ and $C$ weigh $4\,\text{kg}$, $6\,\text{kg}$ and $8\,\text{kg}$ respectively. The coefficient of sliding friction between any two surfaces is $0.5$. The force $\vec{F}$ required to slide the block $C$ with constant speed is ___ N.
(Given: $g = 10\,\text{m s}^{-2}$)
- JEE Main - 2026
- Rotational Mechanics
Two circular discs of radius \(10\) cm each are joined at their centres by a rod, as shown in the figure. The length of the rod is \(30\) cm and its mass is \(600\) g. The mass of each disc is also \(600\) g. If the applied torque between the two discs is \(43\times10^{-7}\) dyne·cm, then the angular acceleration of the system about the given axis \(AB\) is ________ rad s\(^{-2}\).
- JEE Main - 2026
- Rotational motion
Concepts Used:
Semiconductors
Semiconductors are a crystalline solid materials, whose electrical conductivity lies between a conductor and an insulator. Semiconductors are mainly used in the manufacturing of electronic devices like capacitors, transistors, diodes, Integrated circuits, etc.
Properties of Semiconductor:
- Semiconductor acts like an insulator at Zero Kelvin. On increasing the temperature, it works as a conductor.
- Due to their exceptional electrical properties, semiconductors can be modified by doping to make semiconductor devices suitable for energy conversion, switches, and amplifiers.
- Lesser power losses.
Uses of Semiconductor:
- Semiconductors are widely used in manufacturing electronics devices like transistors, diodes, sensors, integrated circuits.
- Semiconductors are widely used in all electronic devices, like mobile phones, digital cameras, communication devices, trains, ATMs, etc.