Step 1: Least–squares condition (orthogonal projection).
To minimize $\|\mathbf{e}\|$ in $\mathbf{v}_1=\alpha\mathbf{v}_2+\mathbf{e}$, we need $\mathbf{e}\perp \mathbf{v}_2$. Hence $\mathbf{v}_2^{\top}(\mathbf{v}_1-\alpha\mathbf{v}_2)=0 \Rightarrow \alpha=\dfrac{\mathbf{v}_2^{\top}\mathbf{v}_1}{\mathbf{v}_2^{\top}\mathbf{v}_2}$.
Step 2: Compute the dot products.
$\mathbf{v}_2^{\top}\mathbf{v}_1 = [2,1,3].[1,2,0] = 2.1 + 1.2 + 3.0 = 4$.
$\mathbf{v}_2^{\top}\mathbf{v}_2 = 2^2 + 1^2 + 3^2 = 4+1+9=14$.
Step 3: Evaluate $\alpha$.
\[ \alpha=\frac{4}{14}=\frac{2}{7}. \] \[ \boxed{\dfrac{2}{7}} \]
Here are two analogous groups, Group-I and Group-II, that list words in their decreasing order of intensity. Identify the missing word in Group-II.
Abuse \( \rightarrow \) Insult \( \rightarrow \) Ridicule
__________ \( \rightarrow \) Praise \( \rightarrow \) Appreciate
Two resistors are connected in a circuit loop of area 5 m\(^2\), as shown in the figure below. The circuit loop is placed on the \( x-y \) plane. When a time-varying magnetic flux, with flux-density \( B(t) = 0.5t \) (in Tesla), is applied along the positive \( z \)-axis, the magnitude of current \( I \) (in Amperes, rounded off to two decimal places) in the loop is (answer in Amperes).
A 50 \(\Omega\) lossless transmission line is terminated with a load \( Z_L = (50 - j75) \, \Omega.\) { If the average incident power on the line is 10 mW, then the average power delivered to the load
(in mW, rounded off to one decimal place) is} _________.
In the circuit shown below, the AND gate has a propagation delay of 1 ns. The edge-triggered flip-flops have a set-up time of 2 ns, a hold-time of 0 ns, and a clock-to-Q delay of 2 ns. The maximum clock frequency (in MHz, rounded off to the nearest integer) such that there are no setup violations is (answer in MHz).