List of top Physics Questions asked in BITSAT

An ideal refrigerator has a freezer at a temperature of $-13^{\circ} C$. The coefficient of performance of the engine is $5$. The temperature of the air (to which heat is rejected) is

Which of the following does not depict the correct link between technology and physics?

One kilogram of ice at $0^{\circ} C$ is mixed with one kilogram of water at $80^{\circ} C$. The final temperature of the mixture is (Take specific heat of water $=4200\, kJ / kg -{ }^{\circ} C$, Latent heat of ice $=336\, kJ / kg$ )

A clock pendulum made of invar has a period of $0.5 \, s$, at $20^{\circ}C$. If the clock is used in a climate where the temperature averages to $30^{\circ}C $, how much time does the clock lose in each oscillation? (For invar, $a = 9 \times 10^{-7} /^{\circ} C, g$ = constant)

A bar magnet is $10 \,cm$ long is kept with its north ($N$)-pole pointing north. A neutral point is formed at a distance of $15 \,cm$ from each pole: Given the horizontal component of earth's field is $0.4$ Gauss, the pole strength of the magnet is

When a wave traverses a medium the displacement of a particle located at $x$ at a time is given by $y = a \sin (bt - cx)$, where $a$, and $b$ are constants of the wave, which of the following is a quantity with dimensions?

A body is projected vertically upwards at time $ t = 0$ and it is seen at a height $H$ at time $t_1$ and $t_2$ second during its flight. The maximum height attained is ($g$ is acceleration due to gravity)

A piece of metal weighs $45 \, g$ in air and $25 \, g$ in a liquid of density $1.5 \times 10^3 \, kg-m^{-3}$ kept at $30^{\circ} C$. When the temperature of the liquid is raised to $40^{\circ}C$, the metal piece weighs $27\, g$. The density of liquid at $40^{\circ}C$ is $1.25 \times 10^3 \, kg-m^{-3}$. The coefficient of linear expansion of metal is

Two sources $A$ and $B$ are sending notes of frequency $680 \,Hz$. A listener moves from $A$ and $B$ with-a constant velocity $u$. If the speed of sound in air is $340 \, ms^{-1}$ what must be the value of u so that he hears $10$ beats per second?

A body of mass $5 \,kg$ makes an elastic collision with another body at rest and continues to move in the original direction after collision with a velocity equal to $\frac{1}{10}$ th of its original velocity. Then the mass of the second body is

Two point charges $-q$ and $+ q$ are located at point's $(0, 0, - a)$ and, $(0, 0, a)$ respectively. The electric potential at a point $(0, 9, z)$, where $z > a$ is

A wire of length $l$ is bent into a circular loop of radius $R$ and carries a current $I$.The magnetic field at the centre of the $B$. The same wire is now bent into a double loop of equal radii. If both loops carry the same current $I$ and it is in the same direction, the magnetic field at the centre of the double loop will be -

If the ratio of lengths, radii and Young's modulus of steel and brass wires shown in the figure are $a, b$ and $c$ respectively, the ratio between' the increase in lengths of brass and steel wires would be

An infinitely long straight conductor is bent into the shape as shown below. It carries a current of $I$ ampere and the radius of the circular loop is $R$ metre. Then, the magnitude of magnetic induction at the centre of the circular loop is -

In the adjacent shown circuit, a voltmeter of internal resistance $R$, when connected across $B$ an $C$ reads $\frac{100}{3} V$. Neglecting the internal resistance of the battery, the value of $R$ is

Starting from rest, the time taken by a body sliding down on a rough inclined plane at $45^{\circ}$ with the horizontal is, twice the time taken to travel on a smooth plane of same inclination and same distance. Then the coefficient of kinetic friction is

A steel wire can withstand a load up to $2940\, N$. A load of $150\, kg$ is suspended from a rigid support. The maximum angle through which the wire can be displaced from the mean position, so that the wire does not break when the load passes through the position of equilibrium, is

A load of $1\, kg$ weight is a attached to one end of a steel wire of area of cross-section $ 3 \, mm^2$ and Young's modulus $10^{11} \, N/m^2$. The other end is suspended vertically from a hook on a wall, then the load is pulled horizontally and released. When the load passes through its lowest position the fractional change in length is $(g = 10 \, m/s^2)$

The surface tension of soap solution is $0.03\, N/m$. The work done in blowing to form a soap bubble of surface area $40 \, cm^2, (in\, J)$ is

One litre of oxygen at a pressure of $1 \,atm$ and two litres of nitrogen at a pressure of $0.5\, atm$, are introduced into a vessel of volume $1\, L$. If there is no change in temperature, the final pressure of the mixture of gas (in atm) is

In the adiabatic compression, the decrease in volume is associated with

The magnetised wire of moment $M$ and length $l$ is bent in the form of semicircle of radius $r$. Then its magnetic moment is

An $X$-ray tube produces a continuous spectrum of radiation with its shortest wavelength of $45 \times 10^{-2}?$. The maximum energy of a photon in the radiation in $eV $ is $(h = 6.62 \times 10^{-34} \, J-s, c = 3 \times 10^8 \, m/s)$

Two concentric coils of $10$ turns each are placed in the same plane. Their radii are $20\, cm$ and $40\, cm$ and carry $0.2\, A$ and $0.3\, A$. current respectively in opposite directions. The magnetic induction (in tesla) at the center is