>
Andhra Pradesh Post Graduate Engineering Common Entrance Test
List of top Questions asked in Andhra Pradesh Post Graduate Engineering Common Entrance Test
For a steady-state mixed reactor the space-time is equivalent to the holding time for
AP PGECET - 2024
AP PGECET
Chemical Engineering
Chemical Reactions
The most suitable reactor to carry out an auto-thermal reaction is a:
AP PGECET - 2024
AP PGECET
Chemical Engineering
Chemical Reactions
Flooding in a distillation column is detected by a sharp
AP PGECET - 2024
AP PGECET
Chemical Engineering
Mass Transfer
Moisture in a solid exerting an equilibrium vapour pressure equal to that of the pure liquid at that temperature is
AP PGECET - 2024
AP PGECET
Chemical Engineering
Mass Transfer
A reaction is of zero order when the rate of reaction is
AP PGECET - 2024
AP PGECET
Chemical Engineering
Chemical Reactions
Higher temperature increases the rate of leaching in a solid-liquid system due to:
AP PGECET - 2024
AP PGECET
Chemical Engineering
Mass Transfer
The activation energy at high temperatures is lower than at lower temperatures, which represents
AP PGECET - 2024
AP PGECET
Chemical Engineering
Chemical Reactions
In case of adsorption hysteresis, the desorption equilibrium pressure is
AP PGECET - 2024
AP PGECET
Chemical Engineering
Mass Transfer
In liquid-liquid extraction, if the selectivity is unity, then
AP PGECET - 2024
AP PGECET
Chemical Engineering
Mass Transfer
A plate is called a theoretical plate when
AP PGECET - 2024
AP PGECET
Chemical Engineering
Mass Transfer
Lewis number is the ratio of
AP PGECET - 2024
AP PGECET
Chemical Engineering
Mass Transfer
At a given temperature, the humid volume is
AP PGECET - 2024
AP PGECET
Chemical Engineering
Mass Transfer
The steady state gas phase reaction 3A + B $\rightarrow$ C + 2D takes place on a catalyst surface. What will be the value of the flux ratio $ N_A / N_D $?
AP PGECET - 2024
AP PGECET
Chemical Engineering
Mass Transfer
The penetration theory relates average mass transfer coefficient ($ k $) with diffusivity ($ D $)
AP PGECET - 2024
AP PGECET
Chemical Engineering
Mass Transfer
The absorption factor can be increased by:
AP PGECET - 2024
AP PGECET
Chemical Engineering
Mass Transfer
If reflux in a distillation column is 100 mol/hr and the overhead product rate is 50 mol/hr, the reflux ratio is
AP PGECET - 2024
AP PGECET
Chemical Engineering
Mass Transfer
In shell and tube heat exchanger, external cleaning of the tubes is easy in case of
AP PGECET - 2024
AP PGECET
Chemical Engineering
Heat Transfer
The heat flux in the nucleate boiling regime is proportional to
AP PGECET - 2024
AP PGECET
Chemical Engineering
Heat Transfer
As per the Stefan-Boltzmann law the total energy emitted by a black body is directly proportional to
AP PGECET - 2024
AP PGECET
Chemical Engineering
Heat Transfer
Use of multiple effect evaporator results in:
AP PGECET - 2024
AP PGECET
Chemical Engineering
Heat Transfer
In a heat exchanger, for the same terminal temperatures, the logarithmic mean temperature difference for counter flow is
AP PGECET - 2024
AP PGECET
Chemical Engineering
Heat Transfer
In a shell and tube heat exchanger, steam is condensing on the shell side and a cold fluid is flowing through the tubes in the turbulent flow region, then the Wilson plot is used to:
AP PGECET - 2024
AP PGECET
Chemical Engineering
Heat Transfer
Dropwise condensation,
AP PGECET - 2024
AP PGECET
Chemical Engineering
Heat Transfer
A fluid energy mill is used for:
AP PGECET - 2024
AP PGECET
Chemical Engineering
Fluid Mechanics
Ratio of emissive power of a body to the emissive power of a perfectly black body, is known
AP PGECET - 2024
AP PGECET
Chemical Engineering
Heat Transfer
Prev
1
...
61
62
63
64
65
...
107
Next