The input characteristics of a transistor in $CE$ mode is the graph obtained by plotting
- $I_{B}$ against $ V_{BE}$ at constant $ V_{CE}$
- $I_{B}$ against $V_{CE}$ at constant $V_{BE}$
- $I_{B}$ against $I_{C}$ at constant $V_{CE}$
- $I_{B}$ against $I_{C}$ at constant $V_{BE}$
The Correct Option is A
Solution and Explanation
$R_{i}=\left(\frac{\Delta V_{B E}}{\Delta I_{B}}\right)_{V_{C E}}=\text { constant }$
Top Questions on Transistors
In the circuit shown, the identical transistors Q1 and Q2 are biased in the active region with \( \beta = 120 \). The Zener diode is in the breakdown region with \( V_Z = 5 \, V \) and \( I_Z = 25 \, mA \). If \( I_L = 12 \, mA \) and \( V_{EB1} = V_{EB2} = 0.7 \, V \), then the values of \( R_1 \) and \( R_2 \) (in \( k\Omega \), rounded off to one decimal place) are _________, respectively.
- The electron mobility \( \mu_n \) in a non-degenerate germanium semiconductor at 300 K is 0.38 m$^2$/Vs. The electron diffusivity \( D_n \) at 300 K (in cm$^2$/s, rounded off to the nearest integer) is _________.
- A square metal sheet of 4 m \( \times \) 4 m is placed on the x-y plane as shown in the figure below. If the surface charge density (in \( \mu \)C/m\(^2\)) on the sheet is \( \rho_s(x, y) = 4|y| \), then the total charge (in \( \mu \)C, rounded off to the nearest integer) on the sheet is _________.
- The current gain of a transistor in a common emitter configuration is 80. The resistances in collector and base sides of the circuit are 5 k$\omega$ and 1 k$\omega$ respectively. If the input voltage is 2 mV, the output voltage is:
- AP EAMCET - 2024
- Physics
- Transistors
- In an \( npn \) transistor circuit, the collector current is \( 10 \) mA. If \( 95\% \) of the electrons emitted reach the collector, then the base current is nearly:
- AP EAPCET - 2024
- Physics
- Transistors
Questions Asked in KCET exam
- If the number of terms in the binomial expansion of \((2x + 3)^n\) is 22, then the value of \(n\) is:
- KCET - 2025
- Binomial theorem
The circuit shown in the figure contains two ideal diodes \( D_1 \) and \( D_2 \). If a cell of emf 3V and negligible internal resistance is connected as shown, then the current through \( 70 \, \Omega \) resistance (in amperes) is:
- KCET - 2025
- Refractive index
Charges are uniformly spread on the surface of a conducting sphere. The electric field from the center of the sphere in a point outside the sphere varies with distance \( r \) from the center as
- KCET - 2025
- Electric Dipole
- Choose the correct statement from the following:
- KCET - 2025
- evolution and natural selection
- Darwin’s finches represent one of the best examples of ____
- KCET - 2025
- evolution and natural selection
Concepts Used:
Transistors
Transistor
A transistor is a type of semiconductor device that can be used to both conduct and insulate electric current or voltage. A transistor basically acts as a switch and an amplifier. In simple words, we can say that a transistor is a miniature device that is used to control or regulate the flow of electronic signals.
Parts of a Transistor:
A transistor is a combination of three terminals made of semiconducting materials that help in making a connection to an external circuit and allow current to flow. The three terminals are:
- Base: The base activates the transistor. It is thin and lightly doped. It is put in the centre of the transistor.
- Emitter: The emitter is the negative terminal of the transistor. It is heavily doped and is moderately sized.
- Collector: The collector is the negative terminal of the transistor. It is located on the right side of a transistor and is moderately doped. It is larger than the emitter.
Read More: Difference Between NPN and PNP Transistor
Types of Transistors:
A transistor is a type of electronic device which is formed by p-type and n-type semiconductors.
NPN Transistor
- NPN transistor is a type of Bipolar Junction Transistor.
- In this, electrons are major current carriers, and minor ones are holes.
- Their arrangement is in such a way that N-type doped semiconductors are separated by the layer of P-type doped semiconductors which is a thin layer of material embedded between them.
- Emitter Current = Collector Current + Base Current
PNP Transistor
- PNP transistor is also a type of Bipolar Junction Transistor.
- In these, holes are the major source that carries current, and electrons are minor.
- Their arrangement is in a way that P-type doped semiconductor is separated by N-type doped semiconductor material which is a thin layer.
- Emitter Current = Collector Current + Base Current
Read More: Characteristics of a Transistor
Configurations of a Transistor:
Using the three types of configuration can be used to design any transistor circuit. The three types of configuration of a transistor are:
- Common Emitter Transistor
- Common Base Transistor
- Common Collector Transistor
Common Emitter (CE) Configuration of a Transistor
In Common Emitter Configuration, the transistor’s emitter terminal will be connected common between the output terminal and the input terminal.
Input Characteristics
- Variation of emitter current (IB) with Base-Emitter voltage (VBE) when Collector-Emitter voltage (VCE) is held constant.
- Rin = ΔVBE/ΔIB | VCE = Constant
Output Characteristics
- Variation of collector current (IC) with Collector-Emitter voltage (VCE) when the base current (IB) is held constant.
- Rout = ΔVCE/ΔIC | IB = Constant
Current Transfer Characteristics
- The variation of the collector current (IC) with the base current (IB) when the collector-emitter voltage (VCE) is constant.
- α = ΔIC/ΔIB | VCB = Constant
Common Base (CB) Configuration of a Transistor
In Common Base Configuration, the transistor’s base terminal will be connected common between the output terminal and the input terminal.
Input Characteristics
- Variation of emitter current (IE) with Base-Emitter voltage (VBE) when the Collector Base voltage (VCB) is held constant.
- Rin = ΔVBE/ΔIE | VCB = Constant
Output Characteristics
- Variation of collector current (IC) with Collector-Base voltage (VCB) when the emitter current (IE) is held constant.
- Rout = ΔVCB/ΔIB | IE = Constant
Current Transfer Characteristics
- The variation of the collector current (IC) with the emitter current (IE) when the Collector Base voltage (VCB) is constant.
- α = ΔIC/ΔIE | VCB = Constant
Common Collector Configuration of a Transistor
In Common Collector Configuration, the transistor’s collector terminal will be connected common between the output terminal and the input terminal.
Input Characteristics
- Variation of emitter current (IB) with Collector-Base voltage (VCB) when the Collector Base voltage (VCB) is held constant.
Output Characteristics
- Variation of emitter current (IE) with Collector-Emitter voltage (VCE) when the base current (IB) is held constant.
Current Transfer Characteristics
- The variation of the collector current (IE) with the base current (IB) when the Collector-Emitter voltage (VCE) is constant.