List of practice Questions

Match List - I with List - II.

List - I	List -II
(Assemblies)	(Number of parts used)
(A) Open Bearing	(I)  5
(B)Sleeve and cotter join	(II) 4
(C)Gib and cotter joint	(III) 3
(D)Turnbuckle	(IV) 2

Choose the correct answer from the options given below:

Match List - I with List - II.

List - I	List -II
(Details of collar stud)	(Standard dimension) (Where 'd' is nomial diameter of stud)
(A) Threaded length of nut end	(I)  d
(B)Diameter of collar	(II) 0.4 d
(C)Thickness of collar	(III) 1.5 d
(D)Length of metal end	(IV)  2 d+6

Choose the correct answer from the options given below:

Match List - I with List - II.
(Thread of P = Pitch, d= Actual depth and D=Theoretical depth)

List - I	List -II
(A) B.S.W. Thread	(I) d = 0.61 P
(B)Metric thread (internal)	(II) D = 0.96 P
(C)Metric thread (external)	(III) d = 0.54 P
(D) Square thread	(IV) D= 0.50 P

Choose the correct answer from the options given below:

Shape of oil hole in Bush Bearing is__________.

Choose the incorrect statement for Sleeve and cotter joint :

In Gib and cotter joint, if the thickness of cotter is 8 mm, then thickness of gib will be______.

Turnbuckle joint is not used in _____.

In flange pipe joint, both flanges with gasket in between them are connected together by____.

Match List - I with List - II.

List - I	List -II
(Solids)	(Their Features)
(A) Prism	(I) Base is a circle.
(B) Pyramid	(II) Two similar ends and rectangular faces.
(C) Cone	(III) Two circular faces and one curved surface.
(D) Cylinder	(IV) One base and slant triangular faces.

Choose the correct answer from the options given below:

Match List - I with List - II.

List - I	List -II
(Solids)	(Their Features)
(A)Angle of Line indicating Isometric lengths with base line	(I) \(15\degree\)
(B) Angle of line showing true lengths with base line.	(II) \(30\degree\)
(C) Angle between lines showing isometric lengths and true lengths.	(III) \(45\degree\)
(D) Angle of projectors with base line.	(IV) \(90\degree\)

Choose the correct answer from the options given below:

In conventional representation of external V-Thread, root is represented by _______ in its front view.

In the top view of a vertical stud, two complete and one broken circle is shown in

It is a cylindrical piece of metal having threads at both ends and non threaded portion of square cross-section at the centre.

The head thickness of a Snap head rivet is ____.(Where d is rivet diameter)

Two continous thick circles are shown in the top view of vertical _________.

The shape of cotter is _____.

Open bearing is useful for shafts rotating at

Number of Triangles in given figure:

The radius taken to draw crest/root in knuckle thread is________, where 'P' is the pitch of thread.

Both crest and root are round in

Chamfering of head of a bolt is done to

The size of chamfer circle is taken as _____  in square/hexagonal headed bolt and nut with nominal diameter  ́d'.

Choose the incorrect statement in case of plain washer:

A solid without any edge or vertex when visualized from any direction appears as a circle is

The only difference between isometric view and isometric projection of a cube is its