>
questions
List of practice Questions
Industrial paddle agitators turn at speed between:
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Biochemical Engineering
Which of the following size reduction equipment can accept feed sizes of 10 inches and up?
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Material Science
A pressure of \( 500 \, \text{kPa} \) applied to \( 2 \, \text{m}^3 \) of liquid results in a volume change of \( 0.004 \, \text{m}^3 \). The bulk modulus in MPa is:
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Fluid Mechanics
Arrange the following flow measuring devices in the increasing order of head loss caused by them:
(A). Flow nozzle
(B). Venturimeter
(C). Orifice meter
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Fluid Mechanics
Bernoulli’s equation cannot be applied when the flow is:
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Fluid Mechanics
Crude oil of kinematic viscosity 2.25 Stokes flows through a 20 cm diameter pipe. If the rate of flow is 1.5 liters/sec, what will be the type of flow?
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Fluid Mechanics
Impeller diameter in the case of a turbine agitator is:
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Biochemical Engineering
Rain drops fall from a great height under gravity. Select the correct statement:
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Fluid Mechanics
For estimation of heat capacity of a solid compound, one can use
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Thermodynamics
Fugacity is most suitable for
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Thermodynamics
In order that the water shall never rise more than 100 cm above the crest for a discharge of 5 cubic meters per second, the length of the wire will be:
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Fluid Mechanics
The liquid phases considered under Navier-Stokes equations are
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Fluid Mechanics
Which of the following statements is not valid for an ideal solution?
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Thermodynamics
Which of the following statements is true?
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Thermodynamics
For a reversible process at constant pressure and temperature, the free energy change is
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Thermodynamics
Gibbs free energy of mixing at constant temperature and pressure must always be
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Thermodynamics
Hess’s law of constant heat summation is based on:
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Thermodynamics
Molar entropy of vaporization at normal boiling point in J/K·mole is:
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Thermodynamics
The direction of a particular spontaneous process is ascertained from which of the following Laws of Thermodynamics?
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Thermodynamics
At a triple point, the number of phases present are
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Thermodynamics
Which of the following is not an example of a closed system?
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Thermodynamics
If\[\int_{\frac{\pi}{6}}^{\frac{\pi}{3}} \sqrt{1 - \sin 2x} \, dx = \alpha + \beta \sqrt{2} + \gamma \sqrt{3},\]where \( \alpha \), \( \beta \), and \( \gamma \) are rational numbers, then \( 3\alpha + 4\beta - \gamma \) is equal to ______.
JEE Main - 2024
JEE Main
Mathematics
Calculus
Let the area of the region \( \{(x, y): 0 \leq x \leq 3, 0 \leq y \leq \min\{x^2 + 2, 2x + 2\}\} \) be \( A \). Then \( 12A \) is equal to ______.
JEE Main - 2024
JEE Main
Mathematics
Area under Simple Curves
How many times does the term Arya occur in the Rig Veda?
CUET (PG) - 2024
CUET (PG)
Ancient Indian History Culture And Arch
Religion and Philosophy of Ancient India
Indian steel was exported to many countries from very early times and came to be called in later times:
CUET (PG) - 2024
CUET (PG)
Ancient Indian History Culture And Arch
History of Science & Technology in India
Prev
1
...
2080
2081
2082
2083
2084
...
5983
Next