Question:
Orlon has monomeric unit
Orlon has monomeric unit
Updated On: Aug 15, 2022
- Acrolein
- Glycol
- Vinyl cyanide
- Isoprene
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
Polyacrylonitrile is used as a substitute for wool in making commercial fibres as orlon or acrilan.
Was this answer helpful?
0
0
Top Questions on Polymers
- Which among the following is a biodegradable polymer?
- For polymers, match each process with the most suitable application listed.
Process Application P Extrusion 1 Producing complex parts with close tolerance Q Injection molding 2 Producing thermosetting plastic components R Blow molding 3 Producing long uniform sections S Compression molding 4 Producing hollow shapes - Caprolactam when heated at high temperature in presence of water, gives
- Match List -I with List-IIChoose the correct answer from the options given below:
List -I List-II A Buna-S I Vinyl chloride B Neoprene II 1,3-Butadiene and styrene C PVC III Tetra flouroethene D Teflon IV Chloroprene - Which of the following is a homopolymer?
View More Questions
Questions Asked in KCET exam
- Ten identical cells each emf 2V and internal resistance 1Ω are connected in series with two cells wrongly connected. A resistor of 10Ω is connected to the combination. What is the current through the resistor?
- KCET - 2023
- Cells in Series and in Parallel
- The speed of sound in an ideal gas at a given temperature T is v. The rms speed of gas molecules at that temperature is vrms. The ratio of the velocities v and vrms for helium and oxygen gases are X and X' respectively. Then \(\frac{X}{X'}\) is equal to
- KCET - 2023
- Thermodynamics
- If \(p(\frac{1}{q}+\frac{1}{r}),q(\frac{1}{r}+\frac{1}{p}),r(\frac{1}{p}+\frac{1}{q})\) are in A.P., then p, q, r
- KCET - 2023
- Arithmetic Progression
- A stretched wire of a material whose Young's modulus Y = 2 × 1011 Nm-2 has Poisson's ratio of 0.25. Its lateral strain εl = 10-3. The elastic energy density of the wire is
- KCET - 2023
- mechanical properties of solids
- A metallic rod of length 1 m held along east-west direction is allowed to fall down freely. Given horizontal component of earth’s magnetic field BH = 3 × 10-5 T. The emf induced in the rod at an instant t = 2s after it is released is ( Take g = 10 ms-2 )
- KCET - 2023
- Faradays laws of induction
View More Questions