Let $\gamma_1$ be the ratio of molar specific heat at constant pressure and molar specific heat at constant volume of a monoatomic gas and $\gamma_2$ be the similar ratio of diatomic gas Considering the diatomic gas molecule as a rigid rotator, the ratio, $\frac{\gamma_1}{\gamma_2}$ is :
- $\frac{21}{25}$
- $\frac{25}{21}$
- $\frac{35}{27}$
- $\frac{27}{35}$
The Correct Option is B
Solution and Explanation
For monoatomic gas
For diatomic gas at low temperatures
Top Questions on specific heat capacity
- Two moles a monoatomic gas is mixed with six moles of a diatomic gas. The molar specific heat of the mixture at constant volume is :
- JEE Main - 2024
- Physics
- specific heat capacity
- The circuit shown in the figure contains an inductor L, a capacitor \(C_0\), a resistor\( R_0\) and an ideal battery. The circuit also contains two keys \(K_1\) and \(K_2\). Initially, both the keys are open and there is no charge on the capacitor. At an instant, key \(K_1\) is closed and immediately after this the current in \(R_0\) is found to be \(I_1\). After a long time, the current attains a steady state value \(I_2\). Thereafter,\( K_2\) is closed and simultaneously \(K_1\) is opened and the voltage across \(C_0\) oscillates with amplitude \(C_0\) and angular frequency \(\omega_0\).
Match the quantities mentioned in List-I with their values in List-II and choose the correct option.List-I List-II P The value of \(I1\) in Ampere is I \(0\) Q The value of I2 in Ampere is II \(2\) R The value of \(\omega_0\) in kilo-radians/s is III \(4\) S The value of \(V_0\) in Volt is IV \(20\) 200 - JEE Advanced - 2024
- Physics
- specific heat capacity
The pressure of a gas changes linearly with volume from $A$ to $B$ as shown in figure If no heat is supplied to or extracted from the gas then change in the internal energy of the gas will be Is
- JEE Main - 2023
- Physics
- specific heat capacity
- A water heater of power $2000 W$ is used to heat water. The specific heat capacity of water is $4200 J$ $kg ^{-1} K ^{-1}$ .The efficiency of heater is $70 \%$ .Time required to heat $2 kg$ of water from $10^{\circ} C$ to $60^{\circ} C$ is___$ s$
(Assume that the specific heat capacity of water remains constant over the temperature range of the water)- JEE Main - 2023
- Physics
- specific heat capacity
- ClF5 at room temperature is:
- JEE Main - 2023
- Chemistry
- specific heat capacity
Questions Asked in JEE Main exam
- Let \[ \vec{a} = 2\hat{i} + \alpha \hat{j} + \hat{k}, \quad \vec{b} = -\hat{i} + \hat{k}, \quad \vec{c} = \beta \hat{j} - \hat{k}, \] where \( \alpha \) and \( \beta \) are integers and \( \alpha \beta = -6 \). Let the values of the ordered pair \( (\alpha, \beta) \) for which the area of the parallelogram of diagonals \( \vec{a} + \vec{b} \) and \( \vec{b} + \vec{c} \) is \( \frac{\sqrt{21}}{2} \), be \( (\alpha_1, \beta_1) \) and \( (\alpha_2, \beta_2) \). Then \( \alpha_1^2 + \beta_1^2 - \alpha_2 \beta_2 \) is equal to:
- JEE Main - 2024
- Vectors
- The molecular formula of second homologue in the homologous series of monocarboxylic acid is
- JEE Main - 2024
- Aldehydes, Ketones and Carboxylic Acids
- Given below are two statements: Statement I: $\text{PF}_5$ and $\text{BrF}_5$ both exhibit $\text{sp}^3\text{d}$ hybridisation.Statement II: Both $\text{SF}_6$ and $[\text{Co}(\text{NH}_3)_6]^{3+}$ exhibit $\text{sp}^3\text{d}^2$ hybridisation. In the light of the above statements,choose the correct answer from the options given below:
- JEE Main - 2024
- Hybridisation
- Consider the system of linear equations \( x + y + z = 4\mu \), \( x + 2y + 2\lambda z = 10\mu \), \( x + 3y + 4\lambda^2 z = \mu^2 + 15 \), where \( \lambda, \mu \in \mathbb{R} \). Which one of the following statements is NOT correct?
- JEE Main - 2024
- Linear Algebra
- If the constant term in the expansion of \((1 + 2x - 3x^3) \left(\frac{3}{2}x^2 - \frac{1}{3x}\right)^9\) is \( p \), then \( 108p \) is equal to _________.
- JEE Main - 2024
- Algebra
Concepts Used:
Thermodynamics
Thermodynamics in physics is a branch that deals with heat, work and temperature, and their relation to energy, radiation and physical properties of matter.
Important Terms
System
A thermodynamic system is a specific portion of matter with a definite boundary on which our attention is focused. The system boundary may be real or imaginary, fixed or deformable.
There are three types of systems:
- Isolated System – An isolated system cannot exchange both energy and mass with its surroundings. The universe is considered an isolated system.
- Closed System – Across the boundary of the closed system, the transfer of energy takes place but the transfer of mass doesn’t take place. Refrigerators and compression of gas in the piston-cylinder assembly are examples of closed systems.
- Open System – In an open system, the mass and energy both may be transferred between the system and surroundings. A steam turbine is an example of an open system.
Thermodynamic Process
A system undergoes a thermodynamic process when there is some energetic change within the system that is associated with changes in pressure, volume and internal energy.
There are four types of thermodynamic process that have their unique properties, and they are:
- Adiabatic Process – A process in which no heat transfer takes place.
- Isochoric Process – A thermodynamic process taking place at constant volume is known as the isochoric process.
- Isobaric Process – A process in which no change in pressure occurs.
- Isothermal Process – A process in which no change in temperature occurs.
Laws of Thermodynamics
Zeroth Law of Thermodynamics
The Zeroth law of thermodynamics states that if two bodies are individually in equilibrium with a separate third body, then the first two bodies are also in thermal equilibrium with each other.
First Law of Thermodynamics
The First law of thermodynamics is a version of the law of conservation of energy, adapted for thermodynamic processes, distinguishing three kinds of transfer of energy, as heat, as thermodynamic work, and as energy associated with matter transfer, and relating them to a function of a body's state, called internal energy.
Second Law of Thermodynamics
The Second law of thermodynamics is a physical law of thermodynamics about heat and loss in its conversion.
Third Law of Thermodynamics
Third law of thermodynamics states, regarding the properties of closed systems in thermodynamic equilibrium: The entropy of a system approaches a constant value when its temperature approaches absolute zero.