Question:
In a common emitter transistor amplifier an increase of $50 \,\mu A$ in the base current causes an increase of $1 \,mA$ in the collector current. The change in emitter current is
In a common emitter transistor amplifier an increase of $50 \,\mu A$ in the base current causes an increase of $1 \,mA$ in the collector current. The change in emitter current is
Updated On: Jul 12, 2022
- $1050\,mA$
- $1050\,\mu A$
- $5025\,mA$
- $5025\,\mu A$
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
The change in emitter current is
$\Delta I_E = \Delta I_B + \Delta I_C$
$ = 50 \times 10^{-6} + 1 \times 10^{-3}$
$= 1050 \times 10^{-6} A$
$ = 1050\, \mu A$
Was this answer helpful?
0
0
Top Questions on Semiconductor electronics: materials, devices and simple circuits
The I-V characteristics shown above are exhibited by a:- NEET (UG) - 2024
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- Conductivity of a photodiode starts changing only if the wavelength of incident light is less than 660 nm. The band gap of the photodiode is found to be \[\frac{X}{8} \, \text{eV}.\]The value of $X$ is:\text{(Given, $h = 6.6 \times 10^{-34} \, \text{Js}$, $e = 1.6 \times 10^{-19} \, \text{C}$)}
- JEE Main - 2024
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- To measure the temperature coefficient of resistivity $\alpha$ of a semiconductor, an electrical arrangement shown in the figure is prepared. The arm BC is made up of the semiconductor. The experiment is being conducted at $25^\circ \text{C}$ and the resistance of the semiconductor arm is $3 \, \text{m}\Omega$. Arm BC is cooled at a constant rate of $2^\circ \text{C/s}$. If the galvanometer G shows no deflection after 10 s, then $\alpha$ is:
- JEE Main - 2024
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- The acceptor level of a p-type semiconductor is 6eV. The maximum wavelength of light which can create a hole would be : Given hc = 1242 eV nm.
- JEE Main - 2024
- Physics
- Semiconductor electronics: materials, devices and simple circuits
- Which of the diode circuit shows correct biasing used for the measurement of dynamic resistance of p-n junction diode :
- JEE Main - 2024
- Physics
- Semiconductor electronics: materials, devices and simple circuits
View More Questions
Questions Asked in JIPMER exam
- Binomial nomenclature was first introduced by
- JIPMER - 2015
- KCET - 2022
- Diversity In The Living World
- A convex lens $'A'$ of focal length $20\, cm$ and a concave lens $'B'$ of focal length $5\, cm$ are kept along the same axis with a distance $'d'$ between them. If a parallel beam of light falling on $'A'$ leaves $'B'$ as a parallel beam, then the distance $'d'$ in cm will be :
- JIPMER - 2021
- Spherical Mirrors
- A bacterial flagellum is composed of
- JIPMER - 2021
- Prokaryotic Cells
- $2,4-DNP $ test can be used to identify :
- JIPMER - 2021
- Chemical Reactions
- How many moles of acidified $K_2Cr_2O_7$ is required to liberate $6$ moles of $I_2$ from an aqueous solution of $I^-$ ?
- JIPMER - 2020
- Mole concept and Molar Masses
View More Questions
Concepts Used:
Semiconductors
Semiconductors are a crystalline solid materials, whose electrical conductivity lies between a conductor and an insulator. Semiconductors are mainly used in the manufacturing of electronic devices like capacitors, transistors, diodes, Integrated circuits, etc.
Properties of Semiconductor:
- Semiconductor acts like an insulator at Zero Kelvin. On increasing the temperature, it works as a conductor.
- Due to their exceptional electrical properties, semiconductors can be modified by doping to make semiconductor devices suitable for energy conversion, switches, and amplifiers.
- Lesser power losses.
Uses of Semiconductor:
- Semiconductors are widely used in manufacturing electronics devices like transistors, diodes, sensors, integrated circuits.
- Semiconductors are widely used in all electronic devices, like mobile phones, digital cameras, communication devices, trains, ATMs, etc.