A convex lens of refractive index \(15\) and focal length\(18 \,cm\) in air is immersed in water. The change in focal length of the lens will be_______ cm (Given refractive index of water =\(\frac{4}{3}\))
The focal length changes when a lens is immersed in a medium. Use \[ \mu_\text{eff} = \frac{\mu_\text{lens}}{\mu_\text{medium}} \] in the lens maker's formula.
The focal length of a lens in water is given by:
\[ \frac{1}{f_\text{water}} = \left( \frac{\mu_\text{glass}}{\mu_\text{water}} - 1 \right) \frac{2}{R} \]
For air: \[ \frac{1}{f_\text{air}} = (\mu_\text{glass} - 1) \frac{2}{R} \]
Given:
The ratio of focal lengths in water and air is:
\[ \frac{f_\text{water}}{f_\text{air}} = \frac{\frac{1}{f_\text{air}}}{\frac{1}{f_\text{water}}} = \frac{\mu_\text{glass} - 1}{\frac{\mu_\text{glass}}{\mu_\text{water}} - 1} \]
Substitute the values:
\[ \frac{f_\text{water}}{f_\text{air}} = \frac{1.5 - 1}{\frac{1.5}{\frac{4}{3}} - 1} = \frac{0.5}{2 - 1} = \frac{0.5}{1} = 0.5 \]
Thus:
\[ f_\text{water} = 4 f_\text{air} = 4 \times 18 = 72 \, \text{cm} \]
The change in focal length is:
\[ \Delta f = f_\text{water} - f_\text{air} = 72 - 18 = 54 \, \text{cm} \]
The correct answer is 54.
fH2OI=(μH2Oμg−1)(R2)
=81(R2)
=(4fair)1
So, fH2O=4fair =72cm
So change in focal length =72−18=54cm
A biconvex lens is formed by using two plano-convex lenses as shown in the figure. The refractive index and radius of curvature of surfaces are also mentioned. When an object is placed on the left side of the lens at a distance of \(30\,\text{cm}\), the magnification of the image will be: 
Let the lines $L_1 : \vec r = \hat i + 2\hat j + 3\hat k + \lambda(2\hat i + 3\hat j + 4\hat k)$, $\lambda \in \mathbb{R}$ and $L_2 : \vec r = (4\hat i + \hat j) + \mu(5\hat i + + 2\hat j + \hat k)$, $\mu \in \mathbb{R}$ intersect at the point $R$. Let $P$ and $Q$ be the points lying on lines $L_1$ and $L_2$, respectively, such that $|PR|=\sqrt{29}$ and $|PQ|=\sqrt{\frac{47}{3}}$. If the point $P$ lies in the first octant, then $27(QR)^2$ is equal to}
Which one of the following graphs accurately represents the plot of partial pressure of CS₂ vs its mole fraction in a mixture of acetone and CS₂ at constant temperature?

Optics, deals with the determination of behaviour and the properties of light, along with its interactions with the matter and also with the instruments that are used to detect it.
Ray optics is also known as the geometrical optics and it is a branch of science which describes light propagation.
Reflection is the change in direction of light at an interface in-between two different media so that the wave-front returns into a medium from which it was originated.
Speed of light is the rate at which the light travels in free space.
A phenomenal change in image formed when the light is passed from one medium to another which is called Refraction.
Total Internal Reflection is the reflection of light when the light ray enters into a rarer medium from a denser medium and the angle of incidence is higher than the critical angle of incidence then that light ray will be reflected back to the denser medium.
Read More: Ray Optics and Optical Instruments