List of top Questions asked in CUET (PG)

The crop sequence, which cannot serve any useful purpose in crop rotation is

The moisture held by a well-drained soil against gravity drainage, by the force of surface tension between soil grains and water drops, is called:

The ratio of water stored in the root zone during irrigation to the water needed in the root zone prior to irrigation is called:

The treatment step adopted for removing bushes, debris, and wood from water is known as:

Addition of Alum in water treatment increases:

The disease Methaemoglobinaemia is caused when drinking water supply contains high concentration of

The gauge pressure at the surface of a liquid of density $900 \, \text{kg/m}^3$ is $0.4 \, \text{bar}$. If the atmospheric pressure is $1 \times 10^5 \, \text{Pa}$, calculate the absolute pressure at a depth of $50 \, \text{m}$.

The condition for irrotational flow is given by:

As per Rankine Theory, the coefficient of active earth pressure ($K_a$) is given by:

In stone masonry, the projection which is usually provided to serve as support for joist, truss, or rafter sheet, etc., is known as:

Muscovite is a family member of which category of mineral group?

Basalt is a:

1 Stoke is equal to:

In a static fluid with $y$ as the vertical direction, the pressure variation is given by:

The reduced level of a factory floor is 36.00 m, and the staff reading on the f loor is 1.40 m. The staff reading when held inverted with the bottom touching the Tee-beam of the roof is 3.67 m. What will be the height of the beam above the floor?

The rock fragments contributed by the frost action, mainly along valley-sides and the adjoining cliffs, and carried away by glaciers are known as

The shine of a mineral is known as:

Find the magnetic declination if the magnetic bearing of the sun at noon is $356^\circ$.

For which of the following permanent adjustments of a theodolite is the spire test used

In case of angular measurements being more precise than linear measurements, the traverse can be balanced by:

Oblique offsets are used to