Question:
Which one of the following is NOT suitable for fertigation under drip irrigation because of its slow solubility in water?
Which one of the following is NOT suitable for fertigation under drip irrigation because of its slow solubility in water?
Show Hint
Use only highly water-soluble fertilizers in drip irrigation to avoid clogging.
Updated On: Feb 7, 2025
- Urea
- Super Phosphate
- Gypsum
- Muriate of Potash
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
Step 1: Understanding Fertigation
Fertigation requires water-soluble fertilizers to be delivered efficiently through a drip system.
Step 2: Evaluating Options
- Urea: Highly soluble, making it suitable. - Super Phosphate: Poor solubility, leading to clogging, making it unsuitable. - Gypsum: Moderately soluble but usable in small quantities. - Muriate of Potash: Highly soluble, making it suitable.
Fertigation requires water-soluble fertilizers to be delivered efficiently through a drip system.
Step 2: Evaluating Options
- Urea: Highly soluble, making it suitable. - Super Phosphate: Poor solubility, leading to clogging, making it unsuitable. - Gypsum: Moderately soluble but usable in small quantities. - Muriate of Potash: Highly soluble, making it suitable.
Was this answer helpful?
0
0
Top Questions on Irrigation Engineering and Hydraulic Structures
- If rice requires 10 cm depth of water at an average interval of about 10 days and if the crop period of rice is 120 days, the delta for rice is:
- TANCET - 2024
- Agricultural And Irrigation Engineering
- Irrigation Engineering and Hydraulic Structures
- For which of the following crops is furrow irrigation NOT suited?
- TANCET - 2024
- Agricultural And Irrigation Engineering
- Irrigation Engineering and Hydraulic Structures
- When the soil concentration in water extracted from saturated soil is found to be greater than 18 mmhos/cm, then the soil is said to be:
- TANCET - 2024
- Agricultural And Irrigation Engineering
- Irrigation Engineering and Hydraulic Structures
- If \( i \) is the intensity of rain (cm/hr), \( f \) is the rate of infiltration (cm/hr), and \( f_c \) is infiltration capacity (cm/hr), then the maximum rate at which soil can absorb water is:
- TANCET - 2024
- Agricultural And Irrigation Engineering
- Irrigation Engineering and Hydraulic Structures
- The most desirable alignment of an irrigation canal is along:
- TANCET - 2024
- Civil Engineering
- Irrigation Engineering and Hydraulic Structures
View More Questions
Questions Asked in TANCET exam
- The centrifugal force (N) acting on a material mass 2g present at the tip of a beater of radius 25 cm rotating at 600 rpm is
- TANCET - 2024
- Yarn Engineering
- Select the correct match
- TANCET - 2024
- Yarn Engineering
- Two yarns of count X each are doubled and plied. The ratio of resultant count of two ply yarn expressed in tex system and Ne system is_______. Neglect contraction due to twist.
- TANCET - 2024
- Yarn Engineering
- A reed has 15 dents/cm, and the warp is drawn in two ends per dent. If the finished fabric is 1.4 m wide compared with 1.47 m wide in the reed, what is the finished fabric sett?
- TANCET - 2024
- Fabric Engineering
- Among the following systems of drafting, the objective of which is to reduce the friction between adjacent warp ends?
- TANCET - 2024
- Fabric Engineering
View More Questions