Which one among the following mechanisms is NOT used for transforming rotation to translation in machine tools?
Show Hint
- Screw-nut system
- 4-bevel gear type differential mechanism
- Cam and cam follower system
- Whitworth mechanism
The Correct Option is B
Solution and Explanation
- Screw-nut system (A): This is a direct mechanism used in machine tools, where a screw thread (rotational motion) is engaged with a nut (translational motion) to convert rotation into linear movement.
- 4-bevel gear type differential mechanism (B): This mechanism is not used for transforming rotation to translation. Instead, it is used in the automotive and mechanical industries for differential gear applications, where the goal is to distribute rotational motion between two rotating parts. It does not convert rotation into linear motion.
- Cam and cam follower system (C): This is a commonly used mechanism in machine tools where rotational motion of the cam is converted into a specific linear motion of the follower, used for controlling the movement of machine components.
- Whitworth mechanism (D): This is a classic mechanism used in machine tools for converting rotary motion into straight-line motion, typically used in shapers and slotters.
Thus, the correct answer is (B), as the 4-bevel gear type differential mechanism is not used for rotation-to-translation conversion.
Top Questions on Machine Tools
- The following data are given in relation to turning operation of a cylindrical workpiece.
Diameter of the workpiece = 160 mm, length of the workpiece = 190 mm, cutting velocity = 80 m/min, and tool feed = 0.2 mm/rev.
Assuming the approach and the overrun of the tool to be 5 mm each, the machining time (in minutes) is _____ . (Answer in integer) - The hole of size \(30.000\;\overset{\displaystyle +0.060}{0.000} \text{ mm}\) match with the shaft of size \(30.000\;\overset{\displaystyle +0.010}{0.000} \text{ mm}\) is on interchangeable arrangement. The assembly's maximum allowable clearance will be:
- Read the following statements for some properties:
(A) Pressure is an extensive property.
(B) Specific internal energy is intensive property.
(C) Enthalpy is extensive property.
(D) Temperature is intensive property.
(E) Specific heat is intensive property.
Choose the correct answer from the options given below: - Match List I with List IIChoose the correct answer from the options given below:
List I List II A. Line of action lying on the same line. I Parallel forces B. Lines of action parallel to each other. II Concurrent C. Lines of action intersecting at a point. III Non-Coplanar forces D. Lines of action lying on different planes or in space. IV Collinear forces - Match List I with List IIChoose the correct answer from the options given below:
List I List II A. Double, slides cranks mechanism I Pantograph B. Four bar chain II Elliptical trammel C. Single slider crank mechanism III Hip joint D. Spherical joint IV White worth quick returns mechanism
Questions Asked in GATE PI exam
Courage : Bravery :: Yearning :
Select the most appropriate option to complete the analogy.In the given figure, the numbers associated with the rectangle, triangle, and ellipse are 1, 2, and 3, respectively. Which one among the given options is the most appropriate combination of \( P \), \( Q \), and \( R \)?
- In the iron-carbon equilibrium phase diagram, the eutectoid reaction occurs at 723°C with the eutectoid composition of 0.83 weight % carbon. Ferrite and cementite phases are considered to contain 0.022 weight % carbon and 6.67 weight % carbon, respectively. If a steel specimen with 0.7 weight % carbon is cooled from 950°C to below 723°C, the fraction of eutectoid ferrite is .............
- GATE PI - 2025
- Static Equilibrium
A regular dodecagon (12-sided regular polygon) is inscribed in a circle of radius \( r \) cm as shown in the figure. The side of the dodecagon is \( d \) cm. All the triangles (numbered 1 to 12 in the figure) are used to form squares of side \( r \) cm, and each numbered triangle is used only once to form a square. The number of squares that can be formed and the number of triangles required to form each square, respectively, are:
The number of patients per shift (X) consulting Dr. Gita in her past 100 shifts is shown in the figure. If the amount she earns is ₹1000(X - 0.2), what is the average amount (in ₹) she has earned per shift in the past 100 shifts?
