Question:
The hole of size \(30.000\;\overset{\displaystyle +0.060}{0.000} \text{ mm}\) match with the shaft of size \(30.000\;\overset{\displaystyle +0.010}{0.000} \text{ mm}\) is on interchangeable arrangement. The assembly's maximum allowable clearance will be:
The hole of size \(30.000\;\overset{\displaystyle +0.060}{0.000} \text{ mm}\) match with the shaft of size \(30.000\;\overset{\displaystyle +0.010}{0.000} \text{ mm}\) is on interchangeable arrangement. The assembly's maximum allowable clearance will be:
Updated On: Mar 21, 2024
- 0.06
- 0.05
- 0.04
- 0.03
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
The correct option is (A): 0.06
Was this answer helpful?
0
0
Top Questions on Machine Tools
- The following data are given in relation to turning operation of a cylindrical workpiece.
Diameter of the workpiece = 160 mm, length of the workpiece = 190 mm, cutting velocity = 80 m/min, and tool feed = 0.2 mm/rev.
Assuming the approach and the overrun of the tool to be 5 mm each, the machining time (in minutes) is _____ . (Answer in integer) - Read the following statements for some properties:
(A) Pressure is an extensive property.
(B) Specific internal energy is intensive property.
(C) Enthalpy is extensive property.
(D) Temperature is intensive property.
(E) Specific heat is intensive property.
Choose the correct answer from the options given below: - Match List I with List IIChoose the correct answer from the options given below:
List I List II A. Line of action lying on the same line. I Parallel forces B. Lines of action parallel to each other. II Concurrent C. Lines of action intersecting at a point. III Non-Coplanar forces D. Lines of action lying on different planes or in space. IV Collinear forces - Match List I with List IIChoose the correct answer from the options given below:
List I List II A. Double, slides cranks mechanism I Pantograph B. Four bar chain II Elliptical trammel C. Single slider crank mechanism III Hip joint D. Spherical joint IV White worth quick returns mechanism - In a 2-DOF (RP) manipulator, the joint link parameters are given asThe final transformation matrix for this manipulator is S
Link i ai \(\alpha_i\) di \(\theta_i\) 1 0 \(90\degree\) 0 \(\theta_1\) 2 0 0 d2 0
View More Questions
Questions Asked in CUET PG exam
- Find out the degree of the differential equation \(\frac {d^2t}{ds^2}+(\frac {dt}{ds})^2+2t=0\)
- CUET (PG) - 2023
- Differential Equations
- The surface area of the sphere x2 + y2 + z2 = 9 lying inside the cylinder x2 + y2 = 3y is
- CUET (PG) - 2023
- Surface Area of Cube, Cuboid and Cylinder
- The Ombudsman in a newspaper organisation represents the point of view of the ___.
- CUET (PG) - 2023
- Journalism
- The orthogonal trajectories of the family of curves y = \(ax^3\) is
- The minimum distance of the point (3, 4, 12) from the sphere x2 + y2 + z2 = 1 is
- CUET (PG) - 2023
- Coordinate Geometry
View More Questions