Question:
The ratio of hydraulic stress to the corresponding strain is known as
The ratio of hydraulic stress to the corresponding strain is known as
Updated On: Mar 4, 2024
- Compressibility
- Bulk modulus
- Young's modulus
- Rigidity modulus
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
By Bulk modulus of elasticity,
It is defined as ratio of hydraulic stress to the corresponding the volumetric strain within the elastic limit.
$K=\frac{F V}{A \Delta V}=\frac{\Delta p \cdot V}{\Delta V}$
where, $\Delta p=\frac{F}{A}=$ change in pressure.
It is defined as ratio of hydraulic stress to the corresponding the volumetric strain within the elastic limit.
$K=\frac{F V}{A \Delta V}=\frac{\Delta p \cdot V}{\Delta V}$
where, $\Delta p=\frac{F}{A}=$ change in pressure.
Was this answer helpful?
0
0
Top Questions on mechanical properties of solids
- The two wires A and B of the same material have their lengths in the ratio 1 : 2 and their diameters in the ratio 2 : 1. If they are stretched with the same force, the ratio of the increase in the length of A to that of B will be:
- OJEE - 2024
- Physics
- mechanical properties of solids
- A light ladder is supported on a rough floor and leans against a smooth wall, touching the wall at height \( h \) above the floor. A man climbs up the ladder until the base of the ladder is on the verge of slipping. The coefficient of static friction between the foot of the ladder and the floor is \( \mu \). The horizontal distance moved by the man is:
- OJEE - 2024
- Physics
- mechanical properties of solids
- The source of energy in the Sun is:
- OJEE - 2024
- Physics
- mechanical properties of solids
- Calculate the number density of free carriers in silver, assuming that each atom contributes one carrier. The density of silver is \( 10.5 \times 10^3 \, \text{kg/m}^3 \) and the atomic weight is 107.8.
- OJEE - 2024
- Physics
- mechanical properties of solids
- A light string passing over a smooth light pulley connects two blocks of masses \( m_1 \) and \( m_2 \) (where \( m_2>m_1 \)). If the acceleration of the system is \( \frac{g}{\sqrt{2}} \), then the ratio of the masses \( \frac{m_1}{m_2} \) is:
- BITSAT - 2024
- Physics
- mechanical properties of solids
View More Questions
Questions Asked in KEAM exam
For the reaction:
$3Fe_{(s)} + 2O_2{(g)} \rightarrow Fe_3O_4{(s)}$
$\Delta H = -1650\,\text{kJ mol}^{-1}$, $\Delta S = -600\,\text{J K}^{-1} \text{mol}^{-1}$ at $300\,\text{K}$. What is the value of free energy change for the reaction at $300\,\text{K}$?
- KEAM - 2024
- Thermodynamics
- For the reaction: $$ 2A + B \rightarrow 2C + D $$ The following kinetic data were obtained for three different experiments performed at the same temperature: $$ \begin{array}{|c|c|c|c|} \hline \text{Experiment} & [A]_0 \, (\text{M}) & [B]_0 \, (\text{M}) & \text{Initial rate} \, (\text{M/s}) \\ \hline \text{I} & 0.10 & 0.10 & 0.10 \\ \text{II} & 0.20 & 0.10 & 0.40 \\ \text{III} & 0.20 & 0.20 & 0.40 \\ \hline \end{array} $$ The total order and order in $[B]$ for the reaction are respectively:
- KEAM - 2024
- Grignard’s reagents and their uses
- Torque on a coil carrying current \( I \) having \( N \) turns and area of cross section \( A \) when placed with its plane perpendicular to a magnetic field \( B \) is:
- KEAM - 2024
- Magnitude and Directions of a Vector
- The line joining the points $ (2,2,2) $ and $ (6,6,6) $ meets the line $$ \frac{x - 1}{3} = \frac{y - 2}{2} = \frac{z - 5}{-1} $$ at the point
- KEAM - 2024
- Coordinate Geometry
- Simplify the following expression: \[ \cos 18^\circ \cos 42^\circ \cos 78^\circ. \] The simplified form is:
- KEAM - 2024
- Various Forms of the Equation of a Line
View More Questions
Concepts Used:
Mechanical Properties of Solids
Mechanical properties of solids intricate the characteristics such as the resistance to deformation and their strength. Strength is the ability of an object to resist the applied stress, to what extent can it bear the stress.
Therefore, some of the mechanical properties of solids involve:
- Elasticity: When an object is stretched, it changes its shape and when we leave, it retrieves its shape. Or we can say it is the property of retrieving the original shape once the external force is removed. For example Spring
- Plasticity: When an object changes its shape and never attains its original shape even when an external force is removed. It is the permanent deformation property. For example Plastic materials.
- Ductility: When an object is been pulled in thin sheets, wires or plates, it will be assumed that it has ductile properties. It is the property of drawing into thin wires/sheets/plates. For example Gold or Silver
- Strength: The ability to hold out applied stress without failure. Many types of objects have higher strength than others.