Step 1: Understand the behavior of \( |H(\omega)| \) as a function of damping ratio \( \zeta \).
We are given: \[ |H(\omega)| = \sqrt{\frac{1 + 4 \zeta^2 \left( \frac{\omega}{\omega_n} \right)^2 }{\left[ 1 - \left( \frac{\omega}{\omega_n} \right)^2 \right]^2 + 4 \zeta^2 \left( \frac{\omega}{\omega_n} \right)^2} } \] Let \( r = \frac{\omega}{\omega_n} \). We want to analyze how \( |H(\omega)| \) behaves with respect to \( \zeta \) for different values of \( r \).
Step 2: Observe the trend.
When \( r = 1 \), i.e., excitation frequency equals natural frequency, the expression simplifies but the behavior becomes complex due to the resonance peak.
When \( r>\sqrt{2} \), the numerator increases faster with \( \zeta \) compared to the denominator. Hence, \( |H(\omega)| \) increases with increasing \( \zeta \).
Step 3: Analyze each option.
(A) Incorrect: At \( r = 1 \), the denominator becomes minimal, and amplitude tends to reduce with increasing \( \zeta \).
(B) Incorrect: At \( r = 0.75 \), increasing \( \zeta \) leads to a lower amplitude.
(C) Incorrect: At \( r = \frac{\sqrt{3}}{2} \), amplitude still decreases with damping.
(D) Correct: For \( r>\sqrt{2} \), the increase in \( \zeta \) results in a larger amplitude.
A uniform rigid bar of mass 3 kg is hinged at point F, and supported by a spring of stiffness \( k = 100 \, {N/m} \), as shown in the figure. The natural frequency of free vibration of the system is _____________ rad/s (answer in integer).
A closed system is undergoing a reversible process 1–P–2 from state 1 to 2, as shown in the figure, where X and Y are thermodynamic properties. An irreversible process 2–Q–1 brings the system back from 2 to 1. The net change in entropy of the system and surroundings during the above-mentioned cycle are _______ respectively.
A ship of 3300 tonne displacement is undergoing an inclining experiment in seawater of density 1025 kg/m\(^3\). A mass of 6 tonne is displaced transversely by 12 m as shown in the figure. This results in a 0.12 m deflection of a 11 m long pendulum suspended from the centerline. The transverse metacenter of the ship is located at 7.25 m above the keel.
The distance of the center of gravity from the keel is ________ m (rounded off to two decimal places).
A multi-cell midship section of a ship with \( B = 40 \, {m} \) and \( D = 20 \, {m} \) is shown in the figure. The shear-flows are given as \( q_1 = q_2 = q_3 = 0.9376 \, {MN/m} \). The applied twisting moment on the midship section is ___________ MN·m (rounded off to two decimal places).
Consider a weightless, frictionless piston with a 2 kg mass placed on it as shown in the figure. At equilibrium in position 1, the cylinder contains 0.1 kg of air. The piston cross-sectional area is 0.01 m2. The ambient pressure in the surroundings outside the piston-cylinder arrangement is 0 bar (absolute). When the mass above the piston is removed instantaneously, it moves up and hits the stop at position 2, which is 0.1 m above the initial position.
Assuming \( g = 9.81 \, {m/s}^2 \), the thermodynamic work done by the system during this process is ________ J (answer in integer).