>
questions
List of practice Questions
Secondary nutrients in fertilizers are:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Chemical Technology and Plant Design
As pressure approaches zero, the ratio of fugacity to pressure (f/P) for a gas approaches:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Thermodynamics
In petrochemical industry, any petroleum fraction having an approximate boiling point range between 20°C and 200°C which is used as a feed stock is called:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Chemical Technology and Plant Design
Consider the manufacturing of Linear Alkyl Benzene Sulphonates (LABS). The alkylbenzenes are sulphonated with:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Chemical Technology and Plant Design
Consider a piston-cylinder arrangement containing a gas. This system is heated by placing it on the top of a burner. The system undergoes:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Thermodynamics
Bracket supports are most suitable for:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Chemical Technology and Plant Design
Karbate is:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Material Science
The rate of corrosion of mild steel by sulphuric acid is unacceptably high for:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Material Science
Cost of instrumentation in a modern chemical plant as compared to the total plant cost, ranges from:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Process Control and Instrumentation
Break-even point increases with:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Chemical Technology and Plant Design
Separation of particles of various sizes, shapes, and densities by allowing them to settle in a fluid is called:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mechanical Operations
Which of the following is a coarse crusher?
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mechanical Operations
When a ball mill rotates at a speed higher than the critical speed, its efficiency is:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mechanical Operations
Consider separation of dust particles from gases in a cyclone separator. For a given particle size, the terminal velocity is maximum:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mechanical Operations
If a mass of solid particles is packed by tapping, the bulk density of the mass:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mechanical Operations
In forced convection, the Nusselt number (Nu) is a function of:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Heat and Mass Transfer
In the industrial production of nitric acid, oxidation of ammonia with air in the presence of 90% platinum, 10% rhodium catalyst in the converter constitutes the first step, the feed gas to the converter contains around:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Chemical Technology and Plant Design
For a shell and tube heat exchanger, the clean overall heat transfer coefficient is calculated as 250 Wm\(^2\)K\(^{-1}\) for a specific process condition. It is expected that the heat exchanger may be fouled during the operation and a fouling resistance of 0.001 m\(^2\)KW\(^{-1}\) is prescribed. The dirt overall heat transfer coefficient is ------------ Wm\(^2\)K\(^{-1}\).
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Heat and Mass Transfer
When the interest is compounded monthly, the effective interest rate will be:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Chemical Technology and Plant Design
For a typical project, the cumulative cash flow is zero at the:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Chemical Technology and Plant Design
A production equipment costs ₹200000. Its salvage value is ₹25000. The expected return is ₹50000 per annum. The corporate taxes are taken as 30%. The payback period will be:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Chemical Technology and Plant Design
Compared to saturated oils, unsaturated oils have:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Organic Chemistry
Which of the following is used as an 'entrainer' in the separation of acetic acid-water mixture by distillation?
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
For economical operation in gas absorption, the operating line approximately:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
Steady state temperature reached by a small amount of liquid evaporating into a large amount of unsaturated vapour-gas mixture is:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
Prev
1
...
76
77
78
79
80
...
8292
Next