A hole is drilled in a metal sheet At $27^{\circ} C$, the diameter of hole is $5 cm$ When the sheet is heated to $177^{\circ} C$, the change in the diameter of hole is $d \times 10^{-3} cm$ The value of $d$ will be ___ if coefficient of linear expansion of the metal is $16 \times 10^{-5} { }^{\circ} C$
Correct Answer: 12
Solution and Explanation
at at
Top Questions on Thermal Expansion
- A thin rod having a length of \(1 m\) and area of cross-section \(3 \times 10^{-6} m ^2\) is suspended vertically from one end. The rod is cooled from \(210^{\circ} C\) to \(160^{\circ} C\) After cooling, a mass \(M\) is attached at the lower end of the rod such that the length of rod again becomes \(1m\). Young's modulus and coefficient of linear expansion of the rod are \(2 \times 10^{11} N m ^{-2}\) and \(2 \times 10^{-5} K ^{-1}\), respectively. The value of \(M\) is ____ \(kg\). (Take \(g =10 \ m s ^{-2}\))
- JEE Main - 2023
- Physics
- Thermal Expansion
- At what temperature a gold ring of diameter 6.230 cm be heated so that it can be fitted on a wooden bangle of diameter 6.241 cm? Both the diameters have been measured at room temperature (27°C).
(Given: coefficient of linear thermal expansion of gold αL = 1.4 × 10–5 K–1)- JEE Main - 2022
- Physics
- Thermal Expansion
- Each side of a box made of metal sheet in cubic shape is 'a' at room temperature 'T', the coefficient of linear expansion of the metal sheet is ' $\alpha^{\prime}$. The metal sheet is heated uniformly, by a small temperature $\Delta T ,$ so that its new temperature is $T +\Delta T$. Calculate the increase in the volume of the metal box.
- JEE Main - 2021
- Physics
- Thermal Expansion
- Which of the following curves represent the variation of coefficient of volume expansion of an ideal gas at constant pressure?
- KCET - 2021
- Physics
- Thermal Expansion
- The average thermal energy for a mono-atomic gasis : (kBis Boltzmann constant and T, absolute temperature)
- NEET (UG) - 2020
- Physics
- Thermal Expansion
Questions Asked in JEE Main exam
- Let \[ \vec{a} = 2\hat{i} + \alpha \hat{j} + \hat{k}, \quad \vec{b} = -\hat{i} + \hat{k}, \quad \vec{c} = \beta \hat{j} - \hat{k}, \] where \( \alpha \) and \( \beta \) are integers and \( \alpha \beta = -6 \). Let the values of the ordered pair \( (\alpha, \beta) \) for which the area of the parallelogram of diagonals \( \vec{a} + \vec{b} \) and \( \vec{b} + \vec{c} \) is \( \frac{\sqrt{21}}{2} \), be \( (\alpha_1, \beta_1) \) and \( (\alpha_2, \beta_2) \). Then \( \alpha_1^2 + \beta_1^2 - \alpha_2 \beta_2 \) is equal to:
- JEE Main - 2024
- Vectors
- The molecular formula of second homologue in the homologous series of monocarboxylic acid is
- JEE Main - 2024
- Aldehydes, Ketones and Carboxylic Acids
- Given below are two statements: Statement I: $\text{PF}_5$ and $\text{BrF}_5$ both exhibit $\text{sp}^3\text{d}$ hybridisation.Statement II: Both $\text{SF}_6$ and $[\text{Co}(\text{NH}_3)_6]^{3+}$ exhibit $\text{sp}^3\text{d}^2$ hybridisation. In the light of the above statements,choose the correct answer from the options given below:
- JEE Main - 2024
- Hybridisation
- Consider the system of linear equations \( x + y + z = 4\mu \), \( x + 2y + 2\lambda z = 10\mu \), \( x + 3y + 4\lambda^2 z = \mu^2 + 15 \), where \( \lambda, \mu \in \mathbb{R} \). Which one of the following statements is NOT correct?
- JEE Main - 2024
- Linear Algebra
- If the constant term in the expansion of \((1 + 2x - 3x^3) \left(\frac{3}{2}x^2 - \frac{1}{3x}\right)^9\) is \( p \), then \( 108p \) is equal to _________.
- JEE Main - 2024
- Algebra
Concepts Used:
Thermal Properties of Matter
Anything that has mass or occupies space in the universe is commonly known as matter. There are five properties of matters namely chemical, mechanical, thermal, dimensional, and physical properties.
Read More: Thermal Properties of Matter
Heat Capacity:
The quantity of heat needed to change the temperature of the matter by 1° is known as the heat capacity of a material. The temperature is indicated in kelvin or Celsius and the amount of heat is shown in calories or joules. Specific heat capacity or molar heat capacity is used to calculate the heat capacity of the matter with the stated dimension.
Linear expansion is the situation when change takes place in one dimension or dimensional.
Thermal Expansion:
When heat is passed through the material, the change in the area, volume, and shape is recognized as the thermal expansion property of the material. The expansion of the railway tracks due to maximal heat which leads to accidents is an example of thermal expansion.
Thermal Conductivity:
This property is interconnected to the conductivity of heat. The amount of heat regulated by the material is directly proportional to the conductivity of the material. Not all objects have the capacity to conduct heat throughout their bodies. Insulators are such objects which do not have the property to conduct heat throughout their body.
Thermal Stress:
The stress due to thermal contraction or expansion of the body is known as thermal stress. The explosion of materials takes place due to thermal stress which is dangerous. The cracks on the truck tyres are caused by an outcome of thermal stress. Trucks at high speed generate heat which is caused by the friction of the truck tyres and the road surface.