A gang capacitor is formed by interlocking a number of plates as shown in figure. The distance between the consecutive plates is $0.885\, cm$ and the overlapping area of the plates is $5 \,cm^2$. The capacity of the unit is
- 1.06 PF
- 12.72 PF
- 4 PF
- 6.36 PF
The Correct Option is C
Solution and Explanation
$C =\frac{\varepsilon_{0} A}{d} $
$=\frac{8.854 \times 10^{-12} \times 5 \times 10^{-4}}{0.885 \times 10^{-2}}=0.5\, PF$
Hence, the capacity of 8 capacitors
$=8 C=8 \times 0.5=4 \,pF$
Top Questions on electrostatic potential and capacitance
- Three infinitely long wires with linear charge density \( \lambda \) are placed along the x-axis, y-axis and z-axis respectively. Which of the following denotes an equipotential surface?
- JEE Main - 2025
- Physics
- electrostatic potential and capacitance
- A wire of resistance R is bent into an equilateral triangle and an identical wire is bent into a square. The ratio of resistance between the two end points of an edge of the triangle to that of the square is:
- JEE Main - 2025
- Physics
- electrostatic potential and capacitance
- Two capacitors \( C_1 \) and \( C_2 \) are connected in parallel to a battery. Charge-time graph is shown below for the two capacitors. The energy stored with them are \( U_1 \) and \( U_2 \), respectively. Which of the given statements is true?
- JEE Main - 2025
- Physics
- electrostatic potential and capacitance
In a Young's double slit experiment, three polarizers are kept as shown in the figure. The transmission axes of \( P_1 \) and \( P_2 \) are orthogonal to each other. The polarizer \( P_3 \) covers both the slits with its transmission axis at \( 45^\circ \) to those of \( P_1 \) and \( P_2 \). An unpolarized light of wavelength \( \lambda \) and intensity \( I_0 \) is incident on \( P_1 \) and \( P_2 \). The intensity at a point after \( P_3 \), where the path difference between the light waves from \( S_1 \) and \( S_2 \) is \( \frac{\lambda}{3} \), is:
- JEE Main - 2025
- Physics
- electrostatic potential and capacitance
Arrange the following in the ascending order of wavelength (\( \lambda \)):
(A) Microwaves (\( \lambda_1 \))
(B) Ultraviolet rays (\( \lambda_2 \))
(C) Infrared rays (\( \lambda_3 \))
(D) X-rays (\( \lambda_4 \))
Choose the most appropriate answer from the options given below:- JEE Main - 2025
- Physics
- electrostatic potential and capacitance
Questions Asked in KCET exam
- Three polaroid sheets are co-axially placed as indicated in the diagram. Pass axes of the polaroids 2 and 3 make 30° and 90° with pass axes of polaroid sheet 1. If \( I_1 \) is the intensity of the incident unpolarised light entering sheet 1, the intensity of the emergent light through sheet 3 is
- KCET - 2024
- Polarization
- 8.8 g of monohydric alcohol reacts with ethyl magnesium iodide, releasing 2240 $cm^3$ of ethane at STP. This monohydric alcohol forms a carbonyl compound that answers Tollen’s test. The alcohol is:
- KCET - 2024
- Alcohols, Phenols and Ethers
- Let $\vec{a}$ and $\vec{b}$ be two unit vectors and $\theta$ is the angle between them. Then $\vec{a} + \vec{b}$ is a unit vector if:
- KCET - 2024
- Vectors
- The vectors $\overrightarrow{AB} = 3\hat{i} + 4\hat{k}$ and $\overrightarrow{AC} = 5\hat{i} - 2\hat{j} + 4\hat{k}$ are the sides of a $\triangle ABC$. The length of the median through $A$ is:
- KCET - 2024
- Vectors
- The solution of $e^{\frac{dy}{dx}} = x + 1, \, y(0) = 3$ is:
- KCET - 2024
- Integration
Concepts Used:
Electrostatic Potential and Capacitance
Electrostatic Potential
The potential of a point is defined as the work done per unit charge that results in bringing a charge from infinity to a certain point.
Some major things that we should know about electric potential:
- They are denoted by V and are a scalar quantity.
- It is measured in volts.
Capacitance
The ability of a capacitor of holding the energy in form of an electric charge is defined as capacitance. Similarly, we can also say that capacitance is the storing ability of capacitors, and the unit in which they are measured is “farads”.
Read More: Electrostatic Potential and Capacitance
The capacitor is in Series and in Parallel as defined below;
In Series
Both the Capacitors C1 and C2 can easily get connected in series. When the capacitors are connected in series then the total capacitance that is Ctotal is less than any one of the capacitor’s capacitance.
In Parallel
Both Capacitor C1 and C2 are connected in parallel. When the capacitors are connected parallelly then the total capacitance that is Ctotal is any one of the capacitor’s capacitance.