List of top Analog and Digital Electronics Questions asked in GATE Electrical Engineering

A controller \( (1 + K_{DS}) \) is to be designed for the plant \[ G(s) = \frac{1000 \sqrt{2}}{s(s + 10)^2} \] The value of \( K_D \) that yields a phase margin of 45 degrees at the gain cross-over frequency of 10 rad/sec is ……… (round off to 1 decimal place).

Consider the state-space model:

\[ \dot{x}(t) = A x(t) + B u(t) \] \[ y(t) = C x(t) \] \[ A = \begin{bmatrix} 0 & 1 \\ -2 & -3 \end{bmatrix}, \quad B = \begin{bmatrix} 0 \\ 1 \end{bmatrix}, \quad C = \begin{bmatrix} 1 & 0 \end{bmatrix} \]

The sum of the magnitudes of the poles is:

M with unity coupling coefficient. The stored magnetic energy of the coupled circuits is minimum at which of the following values of \( \frac{I_1}{I_2} \)?
The input voltage \( v(t) \) and current \( I(t) \) of a converter are given by: \[ v(t) = 300 \sin(\omega t) \, \text{V} \] \[ i(t) = 10 \sin(\omega t - \frac{\pi}{6}) + 2 \sin(3 \omega t + \frac{\pi}{6}) + \sin(5 \omega t + \frac{\pi}{2}) \, \text{A} \] Where \( \omega = 2\pi \times 50 \, \text{rad/s} \), the input power factor of the converter is closest to:
A continuous-time periodic signal \( x(t) = 1 + 2 \cos(4\pi t) + 2 \cos(6\pi t) \). If \( T \) is the time period of \( x(t) \), then \[ \frac{1}{T} \int_0^T |x(t)|^2 \, dt = \ \_\_\_\_\_? \]