List of top Building Construction and Structural systems Questions

A roof area of 6000 m\(^2\) of a building is drafted on a drawing sheet as 240 cm\(^2\). The scale used in the drawing sheet is 1:__________ (rounded off to the nearest integer)
As per the National Building Code of India, 2016, choose the correct option where materials are arranged in the increasing order of their embodied energy.
The 4th and 5th dimension of Building Information Modelling (BIM) are _________ and _________, respectively.
For the beam shown below, ignoring the self-weight, the maximum hogging moment (in kN·m) generated for the loads indicated is _______ (rounded off to one decimal place).
For the beam shown below, ignoring the self-weight, the maximum hogging moment (in kN·m) generated for the loads indicated is
A 5 m long Aluminium tie rod of cross-section 0.20 m × 0.04 m is subjected to a tensile force induced by its self-weight of 21.20 kg/m considering gravitational acceleration of 10 \(m/s^2\). If tensile Young's modulus of Aluminium is 70,000 MPa, the maximum tensile strain in the rod is______   \(\times \,10^{-6}\) (rounded off to two decimal places).
The following Figure shows the excavation plan of a two room structure, where the trench has a uniform width of 1.10 meters. If the cumulative centre line length of the trench is 41.10 meters and the required depth of concrete to be poured is 0.30 meters, the volume of concrete in foundation, in cubic meters, will be _______(rounded off to two decimal places).
the excavation plan of a two room structure, where the trench has a uniform width of 1.10 meters
Polytetrafluroethylene (PTFE) coated fiberglass has been used as a roofing membrane in
Which of the following statements is/are correct?
Match the specially shaped bricks in Group-I with their corresponding nomenclature in Group–II
Group IGroup II
(P) Match the specially shaped bricks in Group-I with their corresponding nomenclature in Group–II (1) Plinth Header
(Q) Match the specially shaped bricks in Group-I with their corresponding nomenclature in Group–II(2) Bird's mouth 
(R)    Match the specially shaped bricks in Group-I with their corresponding nomenclature in Group–II(3) Squint 
(S)    Match the specially shaped bricks in Group-I with their corresponding nomenclature in Group–II(4) Double cant 
 (5) Plinth stretcher