The 4th and 5th dimension of Building Information Modelling (BIM) are _________ and _________, respectively.
Show Hint
- Facility management; Sustainability
- Construction schedule; Construction costing
- Sustainability; Construction schedule
- Construction costing; Facility management
The Correct Option is B
Solution and Explanation
Step 2: The 4th dimension of BIM, often referred to as 4D, incorporates the construction schedule, helping to visualize the construction process over time. The 5th dimension, or 5D, involves the integration of construction costing, allowing for cost analysis and budget management throughout the project lifecycle.
Conclusion: The 4th dimension is the "Construction schedule," and the 5th dimension is "Construction costing."
Top Questions on Building material characteristics and applications
- A roof area of 6000 m\(^2\) of a building is drafted on a drawing sheet as 240 cm\(^2\). The scale used in the drawing sheet is 1:__________ (rounded off to the nearest integer)
- GATE AR - 2025
- Building Construction and Structural systems
- Building material characteristics and applications
- As per the National Building Code of India, 2016, choose the correct option where materials are arranged in the increasing order of their embodied energy.
- GATE AR - 2025
- Building Construction and Structural systems
- Building material characteristics and applications
- Match the specially shaped bricks in Group-I with their corresponding nomenclature in Group–II
Group I Group II (P) 
(1) Plinth Header (Q) 
(2) Bird's mouth (R) 
(3) Squint (S) 
(4) Double cant (5) Plinth stretcher - GATE AR - 2024
- Building Construction and Structural systems
- Building material characteristics and applications
Questions Asked in GATE AR exam
- A 24 cm line AB is vertically standing on a horizontal plane. The station point is located 18 cm above ground and 15 cm in front of the line AB. The picture plane is located in between the line AB and station point perpendicular to the sight line. The distance between the picture plane and the station point is 9 cm. The height of the perspective view of the line AB is ________cm. (rounded off to one decimal place)
- GATE AR - 2025
- Height & Distance
A four-arm uncontrolled un-signaled urban intersection of both-way traffic is illustrated in the figure. Vehicles approaching the intersection from the directions A, B, C, and D can move to either left, right, or continue in straight direction. No U-turn is allowed. In the given situation, the maximum number of vehicular crossing conflict points for this intersection is _________ (answer in integer)
- GATE AR - 2025
- Traffic survey methods, Traffic flow Analysis
An individual chooses a transport mode for a particular trip based on three attributes i.e., cost of journey (X), In-vehicle travel time to reach destination (Y), and Out-of-vehicle time taken to access mode at respective stops (Z). The values for these attributes for three modes Rail, Bus and Para-transit are given in the table. If the general utility (U) equation is \( U = - 0.5 \times X - 0.3 \times Y - 0.4 \times Z \), using the Logit model, the estimated probability of choosing Bus is _________ (rounded off to two decimal places).
- GATE AR - 2025
- Transportation
- The spot speeds (in km/h) of eight vehicles in a traffic stream are 42, 52, 56, X, 53, 62, 65, and 48. X is the spot speed of the fourth vehicle. The Time Mean Speed of the traffic stream is 56.25 km/h. After determining the value of X, the calculated Space Mean Speed of the traffic stream is _________ km/h. (rounded off to two decimal places)
- GATE AR - 2025
- Traffic survey methods, Traffic flow Analysis
- Which of the following is/are the characteristics of urban agglomeration as per the Census of India, 2011?
- GATE AR - 2025
- Urban Planning