Question

The coil of a solenoid is made from :

• A. Silicon
• B. Carbon
• C. Germenium
• D. Copper

Hint:

Solenoids need wire that conducts electricity very well to create a strong magnetic field efficiently.
Metals like {Copper} and Aluminum are good conductors. Copper is very common for wires.
Silicon and Germanium are semiconductors, used in electronics like transistors, not typically for solenoid coils.
Carbon can conduct, but not as well as copper for this application.

Answer 1

The Correct Option is D

Concept: A solenoid is an electromagnetic device consisting of a coil of wire. The material of the wire is chosen for its electrical properties. Step 1: Understanding a Solenoid A solenoid is typically a long coil of wire wound in the shape of a helix. When an electric current passes through the wire, it creates a relatively uniform magnetic field inside the coil. Solenoids are used in various devices like electromagnets, inductors, antennas, valves, etc. Step 2: Desired properties of the coil material The wire used to make the coil of a solenoid should primarily be a good electrical conductor. This means it should have low electrical resistivity to allow current to flow easily without excessive heat generation (due to resistive losses, \(P=I^2R\)). It should also be ductile (can be drawn into wires) and reasonably strong. Step 3: Analyzing the options
(1) Silicon (Si): Silicon is a semiconductor. Its conductivity is much lower than that of metals and depends heavily on temperature and impurities (doping). It is not suitable for making coils that need to carry significant current efficiently.
(2) Carbon (C): Carbon, in forms like graphite, can conduct electricity, but its resistivity is generally higher than that of good metallic conductors. Carbon fibers are strong but not typically the primary choice for solenoid coils where high conductivity is paramount.
(3) Germanium (Ge): Germanium is also a semiconductor, similar to silicon. It's not used for making standard solenoid coils.
(4) Copper (Cu): Copper is an excellent electrical conductor with very low resistivity. It is also ductile, relatively inexpensive, and widely available. These properties make it the most common material for winding coils in solenoids, transformers, motors, and other electromagnetic devices. Aluminum is sometimes used as an alternative due to its lighter weight and lower cost, but copper generally has better conductivity for a given cross-section. Step 4: Identifying the most suitable material Considering the need for high electrical conductivity, Copper is the standard and most appropriate material for the coil of a solenoid among the given options.