Match the product in Group-1 with the manufacturing process in Group-2. The correct combination is
Match the product in Group-1 with the manufacturing process in Group-2. The correct combination is
Show Hint
- P-III, Q-I, R-IV, S-II
- P-IV, Q-I, R-II, S-III
- P-III, Q-IV, R-I, S-II
- P-I, Q-IV, R-II, S-III
The Correct Option is C
Solution and Explanation
Ammonia oxidation via Pt catalyst produces nitric acid.
Q: Phosphoric acid → Haifa process (IV)
The Haifa process forms phosphoric acid from phosphate rock and nitric acid.
R: Potassium chloride → Trona process (I)
Trona process yields soda ash and related salts; KCl is linked with Trona-based recovery routes.
S: Stearic acid → Twitchell process (II)
The Twitchell process splits fats/oils to produce fatty acids like stearic acid.
Thus the correct matching is:
P–III, Q–IV, R–I, S–II
Final Answer: (C)
Top Questions on Inorganic chemical industries
- Methane combusts with air in a furnace as \( \text{CH}_4 + 2\text{O}_2 \rightarrow \text{CO}_2 + 2\text{H}_2\text{O} \). The heat of reaction \( \Delta H_\text{r} = -880 \, \text{kJ/mol CH}_4 \), and is assumed to be constant. The furnace is well-insulated, and no other side reactions occur. All components behave as ideal gases with a constant molar heat capacity \( c_p = 40 \, \text{J mol}^{-1} \, \text{°C}^{-1} \). Air may be considered as 20 mol\% \( \text{O}_2 \) and 80 mol\% \( \text{N}_2 \). The air-fuel mixture enters the furnace at \( 50 \, \text{°C} \). The methane conversion \( X \) varies with the air-to-methane mole ratio, \( r \), as: \[ X = 1 - 0.1e^{-2(r-r_s)}, \, \text{with} \, 0.9r_s \leq r \leq 1.3r_s, \] where \( r_s \) is the stoichiometric air-to-methane mole ratio. For \( r = 1.05r_s \), the exit flue gas temperature in \( \, \text{°C} \), rounded off to 1 decimal place, is:
- GATE CH - 2024
- Chemical Technology
- Inorganic chemical industries
Match the products in Group 1 with the manufacturing processes in Group 2
Group 1 Group 2 P) Acetaldehyde I) Sulfate process Q) Sulfuric acid II) Electric furnace process R) Pulp III) Wacker process S) Phosphorus IV) Contact process - GATE CH - 2023
- Chemical Technology
- Inorganic chemical industries
- Which one of the following statements related to octane number is NOT correct?
- GATE CH - 2023
- Chemical Technology
- Inorganic chemical industries
- Which one of the following options represents the major components of oleum?
- GATE CH - 2023
- Chemical Technology
- Inorganic chemical industries
- The chemical formula of Glauber's salt, used in the Kraft process, is
- GATE CH - 2022
- Chemical Technology
- Inorganic chemical industries
Questions Asked in GATE CH exam
An ideal monoatomic gas is contained inside a cylinder-piston assembly connected to a Hookean spring as shown in the figure. The piston is frictionless and massless. The spring constant is 10 kN/m. At the initial equilibrium state (shown in the figure), the spring is unstretched. The gas is expanded reversibly by adding 362.5 J of heat. At the final equilibrium state, the piston presses against the stoppers. Neglecting the heat loss to the surroundings, the final equilibrium temperature of the gas is __________ K (rounded off to the nearest integer).
- GATE CH - 2025
- Thermodynamics
- Consider the matrix: \[ A = \begin{bmatrix} 2 & 3 \\ 1 & 2 \end{bmatrix} \] The eigenvalues of the matrix are 0.27 and __________ (rounded off to 2 decimal places).
- GATE CH - 2025
- Linear Algebra
The residence-time distribution (RTD) function of a reactor (in min$^{-1}$) is
The mean residence time of the reactor is __________ min (rounded off to 2 decimal places).}- GATE CH - 2025
- Chemical Equations
Ideal nonreacting gases A and B are contained inside a perfectly insulated chamber, separated by a thin partition, as shown in the figure. The partition is removed, and the two gases mix till final equilibrium is reached. The change in total entropy for the process is _________J/K (rounded off to 1 decimal place).
Given: Universal gas constant \( R = 8.314 \) J/(mol K), \( T_A = T_B = 273 \) K, \( P_A = P_B = 1 \) atm, \( V_B = 22.4 \) L, \( V_A = 3V_B \).- GATE CH - 2025
- Thermodynamics
The following data is given for a ternary \(ABC\) gas mixture at 12 MPa and 308 K:
\(y_i\): mole fraction of component \(i\) in the gas mixture
\(\hat{\phi}_i\): fugacity coefficient of component \(i\) in the gas mixture at 12 MPa and 308 K
The fugacity of the gas mixture is __________ MPa (rounded off to 3 decimal places).- GATE CH - 2025
- Thermodynamics