Question:
Match List I with List II:LIST I LIST II A. Involute Gear I. Variable Pressure Angle B. Cycloidal Gear II. Constant Pressure Angle C. Gyroscope III. Sensitivity D. Governor IV. Stability
Choose the correct answer from the options given below:
Match List I with List II:
Choose the correct answer from the options given below:
| LIST I | LIST II |
| A. Involute Gear | I. Variable Pressure Angle |
| B. Cycloidal Gear | II. Constant Pressure Angle |
| C. Gyroscope | III. Sensitivity |
| D. Governor | IV. Stability |
Show Hint
Understanding the relationships between machine components and their characteristics is crucial in gear and mechanism design.
Updated On: Dec 28, 2024
- A - I, B - II, C - III, D - IV
- A- II, B- I, C- III, D- IV
- A- I, B- II, C- IV, D- III
- A- II, B- I, C- IV, D- III
Hide Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
The correct matching is as follows:
- A. Involute Gear: Constant pressure angle (II)
- B. Cycloidal Gear: Variable pressure angle (I)
- C. Gyroscope: Stability (IV)
- D. Governor: Sensitivity (III)
Therefore, the correct answer is Option 4: A - II, B - I, C - IV, D - III.
Was this answer helpful?
0
0
Top Questions on Theory of Machines and Design
- Three identical gears A B and C are used in power transmission. Gear A and C are input and output gears Gear B is an idler gear connecting A and C. The gear which is subjected to reversed nature of stress is
- CUET (PG) - 2024
- Mechanical Engineering
- Theory of Machines and Design
- Given below are two statements:
Statement (I): Flywheels are used to control the fluctuations in speed of machines arising from external sources.
Statement (II): Governors are used to control the fluctuations in speed of machines arising from internal sources.
In light of the above statements, choose the most appropriate answer from the options given below.- CUET (PG) - 2024
- Mechanical Engineering
- Theory of Machines and Design
- An aeroplane is making a left turn as viewed by an observer from the rear of the plane The engine rotor of the plane are running in clockwise sense when viewed from the rear side The gyroscopic effects tend to
- CUET (PG) - 2024
- Mechanical Engineering
- Theory of Machines and Design
- The type of brake in which frictional force assists in applying the brakes is termed as
- CUET (PG) - 2024
- Mechanical Engineering
- Theory of Machines and Design
- The instantaneous centre of a sliding body moving on a stationary curved surface lies at
- CUET (PG) - 2024
- Mechanical Engineering
- Theory of Machines and Design
Questions Asked in CUET PG exam
- Match List I (Non-dimensional number) with List II (It is the ratio of):Choose the correct answer from the options given below:
LIST I LIST II A. Reynold’s Number III. Inertia force to viscous force B. Mach Number I. Inertia force to elastic force C. Froude’s Number II. Inertia force to gravity force D. Weber’s Number IV. Inertia force to surface tension force - CUET (PG) - 2024
- Fluid Mechanics
- Match List I (Non-Dimensional Number) with List II (Formula):Choose the correct answer from the options given below.
LIST I LIST II A. Nusselt Number I. \( \mu C_p / k_f \) (where \( k_f \) is thermal conductivity of fluid) B. Biot Number II. \( hL / k_s \) (where \( k_s \) is thermal conductivity of solid) C. Prandtl Number III. \( h / \rho C_p \) D. Stanton Number IV. \( hL / k_f \) (where \( k_f \) is thermal conductivity of fluid) - CUET (PG) - 2024
- Heat Transfer
- Match List I with List II:
LIST I LIST II A. Subcooled water I. 1 bar and 134°C B. Superheated steam II. Dryness fraction = 1 and 100°C C. Steam at critical state III. 20°C and 1.01325 bar D. Saturated steam IV. 374.15°C and 220.8 bar Choose the correct answer from the options given below:
- CUET (PG) - 2024
- Thermodynamics
- Match List I with List II:Choose the correct answer from the options given below:
LIST I (Component) LIST II (Equipment used in) A. Draft Tube III. Francis Turbine B. Thermostatic Expansion Valve II. Cold Storage C. Feed Water Heater I. Thermal Power Plant D. Automatic Expansion Valve IV. Central AC Plant - CUET (PG) - 2024
- Thermodynamics
- Consider the following statements
(A) For the two shafts connected in parallel, the angle of twist of each shaft is same.
(B) For the two shafts connected in series, the shear stress in each shaft is same.
(C) The shear stress in a circular shaft under torsion varies linearly.
(D) The shear stress at the centre of a circular shaft under torsion is zero.
Choose the correct answer from the options given below:- CUET (PG) - 2024
- Mechanics of Materials
View More Questions