Question:
Magnetic flux of $10 \mu Wb $ is linked with a coil, when a
current of 2 mA flows through it. What is the self
inductance of the coil?
Magnetic flux of $10 \mu Wb $ is linked with a coil, when a
current of 2 mA flows through it. What is the self
inductance of the coil?
Updated On: Jun 2, 2024
- 10 mH
- 5 mH
- 15 mH
- 20 mH
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
Magnetic flux $\phi =Li$
$\, \, \, \, \, L= \frac {\phi}{i}= \frac {10 \times 10^{-6}}{2 \times 10^{-3}}=5 \times 10^{-3}=5 mH $
$\, \, \, \, \, L= \frac {\phi}{i}= \frac {10 \times 10^{-6}}{2 \times 10^{-3}}=5 \times 10^{-3}=5 mH $
Was this answer helpful?
0
0
Top Questions on Inductance
- What is the self inductance of a solenoid of length 50 cm, if area of cross section is 10 cm2 and total number of turns is 600?
- CUET (UG) - 2023
- Physics
- Inductance
- If mutual inductance M=3H, L1=4H, L2=9H, then the coefficient of coupling will be equal to?
- MHT CET - 2023
- Physics
- Inductance
- The self-inductance of a solenoid is
- CUET (PG) - 2023
- Physics
- Inductance
- Find the mutual inductance in the arrangement, when a small circular loop of wire of radius ‘R’ is placed inside a large square loop of wire of side L (L << R). The loops are coplanar and their centres coincide:
- JEE Main - 2023
- Physics
- Inductance
- A small square loop of wire of side l is placed inside a large square loop of wire L(L>>l). As shown in figure, both loops are coplanar and their centers coincide at point O. The mutual inductance of the system is:
- JEE Main - 2022
- Physics
- Inductance
View More Questions
Questions Asked in JKCET exam
- A moving block having mass $m$, collides with another stationary block having mass $4\,m$. The lighter block comes to rest after collision. When the initial velocity of the lighter block is $v$, then the value of coefficient of restitution (e) will be
- JKCET - 2019
- work, energy and power
- A force $ F = 3x^2 + 2x + 1 $ acts on a body in the $ x $ -direction. The work done by this force during a displacement from $ x = -1 $ to $ +1 $ is
- JKCET - 2019
- work, energy and power
- What is the colour of the flame on heating potassium in the flame of a Bunsen burner?
- JKCET - 2019
- GROUP 1 ELEMENTS
- If $ a $ , $ b $ , $ c $ are the lengths of three edges of unit cell, $ \alpha $ is the angle between side $ b $ and $ c $ , $ \beta $ is the angle between side $ a $ and $ c $ and $ \gamma $ is the angle between side $ a $ and $ b $ , what is the Bravais Lattice dimensions of a tetragonal crystal?
- JKCET - 2019
- The solid state
- Which of the following compounds is known as copper glance?
- JKCET - 2019
- General Principles and Processes of Isolation of Elements
View More Questions
Concepts Used:
Inductance
Inductance is a key parameter in electrical and electronic circuit designs. Like resistance and capacitance, it is a basic electrical measurement that affects all circuits to some degree.
Inductance is used in many areas of electrical and electronic systems and circuits. The electronic components can be in a variety of forms and may be called by a variety of names: coils, inductors, chokes, transformers, . . . Each of these may also have a variety of different variants: with and without cores and the core materials may be of different types.
There are two ways in which inductance is used:
- Self-inductance: Self-inductance is the property of a circuit, often a coil, whereby a change in current causes a change in voltage in that circuit due to the magnetic effect of caused by the current flow. It can be seen that self-inductance applies to a single circuit - in other words it is an inductance, typically within a single coil. This effect is used in single coils or chokes.
- Mutual-inductance: Mutual inductance is an inductive effect where a change in current in one circuit causes a change in voltage across a second circuit as a result of a magnetic field that links both circuits. This effect is used in transformers.