In a vernier callipers, each cm on the main scale is divided into 20 equal parts. If tenth vernier scale division coincides with nineth main scale division. Then the value of vernier constant will be____ ×10–2 mm
Correct Answer: 5
Solution and Explanation
\(LC=\frac{1MSD}{VSD}\)
\(=\frac{\frac{1}{20}cm}{10} \)
\(=1200cm \)
= 5 × 10–2 mm
Top Questions on Units and measurement
- A car travels at a speed of $ 72 \, \text{km/h} $. What is the car's speed in meters per second?
- MHT CET - 2025
- Physics
- Units and measurement
- The mass of an object is measured as \( (28 \pm 0.01) \) g and its volume as \( (5 \pm 0.1) \) cm\(^3\). What is the percentage error in density?
- MHT CET - 2025
- Physics
- Units and measurement
Mass = \( (28 \pm 0.01) \, \text{g} \), Volume = \( (5 \pm 0.1) \, \text{cm}^3 \). What is the percentage error in density?
- MHT CET - 2025
- Physics
- Units and measurement
- A tiny metallic rectangular sheet has length and breadth of 5 mm and 2.5 mm, respectively. Using a specially designed screw gauge which has pitch of 0.75 mm and 15 divisions in the circular scale, you are asked to find the area of the sheet. In this measurement, the maximum fractional error will be \( \frac{x}{100} \), where \( x \) is:
- JEE Main - 2025
- Physics
- Units and measurement
- What are the units of viscosity, intensity of wave, and pressure gradient?
- JEE Main - 2025
- Chemistry
- Units and measurement
Questions Asked in JEE Main exam
The remainder when \( 64^{64} \) is divided by 7 is equal to:
- JEE Main - 2025
- Arithmetic Progression
- The sum of the infinite series $ \cot^{-1} \left( \frac{7}{4} \right) + \cot^{-1} \left( \frac{19}{4} \right) + \cot^{-1} \left( \frac{39}{4} \right) + \cot^{-1} \left( \frac{67}{4} \right) + ... $ is:
- JEE Main - 2025
- Sequence and series
- If $ \alpha $ is a root of the equation $ x^2 + x + 1 = 0 $ and $$ \sum_{k=1}^{n} \left( \alpha^k + \frac{1}{\alpha^k} \right)^2 = 20$$, then n is equal to _______
- JEE Main - 2025
- Sequence and series
x mg of Mg(OH)$_2$ (molar mass = 58) is required to be dissolved in 1.0 L of water to produce a pH of 10.0 at 298 K. The value of x is ____ mg. (Nearest integer) (Given: Mg(OH)$_2$ is assumed to dissociate completely in H$_2$O)
- JEE Main - 2025
- Equilibrium
- The amount of calcium oxide produced on heating 150 kg limestone (75% pure) is _______ kg. (Nearest integer)
Given: Molar mass (in g mol$^{-1}$) of Ca-40, O-16, C-12- JEE Main - 2025
- Stoichiometry and Stoichiometric Calculations
Concepts Used:
Units and Measurement
Unit:
A unit of a physical quantity is an arbitrarily chosen standard that is broadly acknowledged by the society and in terms of which other quantities of similar nature may be measured.
Measurement:
The process of measurement is basically a comparison process. To measure a physical quantity, we have to find out how many times a standard amount of that physical quantity is present in the quantity being measured. The number thus obtained is known as the magnitude and the standard chosen is called the unit of the physical quantity.
Read More: Fundamental and Derived Units of Measurement
System of Units:
- CGS system
- FPS system
- MKS system
- SI units
Types of Units:
Fundamental Units -
The units defined for the fundamental quantities are called fundamental units.
Derived Units -
The units of all other physical quantities which are derived from the fundamental units are called the derived units.