Question:
If the highest modulation frequency is 5 kHz, find out bandwidth.
If the highest modulation frequency is 5 kHz, find out bandwidth.
Show Hint
When calculating bandwidth for modulated signals, remember that the bandwidth is typically double the highest modulation frequency in standard amplitude modulation.
Updated On: May 5, 2025
- 5 kHz
- 10 kHz
- 2.5 kHz
- 705 kHz
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
The bandwidth of a modulated signal can be calculated as twice the highest modulation frequency. Since the highest modulation frequency is given as 5 kHz, the total bandwidth will be 10 kHz.
Was this answer helpful?
0
0
Top Questions on communication systems
- In QAM, both ______ of a carrier frequency are varied.
- AP PGECET - 2024
- Electronics and Communication Engineering
- communication systems
- A TDMA system uses 25 MHz for the forward link, which is broken into radio channels of 200 kHz. If 8 speech channels are supported on a single radio channel, how many simultaneous users can be accommodated?
- AP PGECET - 2024
- Electronics and Communication Engineering
- communication systems
- Coherent demodulation of FSK signal can be detected using
- AP PGECET - 2024
- Electronics and Communication Engineering
- communication systems
- For a modulation index much less than 1, the FM signal is considered as
- AP PGECET - 2024
- Electronics and Communication Engineering
- communication systems
- At a given probability of error, binary coherent FSK is inferior to binary coherent PSK by
- AP PGECET - 2024
- Electronics and Communication Engineering
- communication systems
View More Questions
Questions Asked in AP PGECET exam
- Starting from \( x_0 = 1 \), one step Newton-Raphson method in solving the equation \( x^3 + 3x - 7 = 0 \) gives the next value as
- AP PGECET - 2024
- Newton Raphson Method
- Peritectic reaction among the following is
- AP PGECET - 2024
- Peritectic Reaction
- The following multiplexer gives the logic gate of a/an _____
- AP PGECET - 2024
- Multiplexers
- How many minimum number of flip-flops are required to make a mod-479 counter?
- AP PGECET - 2024
- Timers and counters
- _____ is used for the removal of SiO2 from desired regions such that the desired impurities can be diffused.
- AP PGECET - 2024
- Semiconductors
View More Questions