>
Exams
>
Automobile Engineering
>
Alternate Fuels
>
hydrogen combustion with air at stoichiometric con
Question:
Hydrogen combustion with air at stoichiometric condition results in:
Show Hint
Optimizing combustion conditions and exhaust treatment technologies is key to managing NOx emissions in hydrogen-powered engines.
TANCET - 2024
TANCET
Updated On:
Feb 27, 2025
Reduced HC, CO and NOx emissions
Reduced HC and CO with increased NOx emissions
Reduced HC with increased CO and NOx emissions
Reduced CO with increased HC and NOx emissions
Hide Solution
Verified By Collegedunia
The Correct Option is
B
Solution and Explanation
Hydrogen combustion at stoichiometric conditions significantly reduces hydrocarbons (HC) and carbon monoxide (CO) but can lead to higher NOx emissions due to higher combustion temperatures.
Download Solution in PDF
Was this answer helpful?
0
0
Top Questions on Alternate Fuels
Which of the following is not a stage of combustion in an SI engine?
TANCET - 2024
Automobile Engineering
Alternate Fuels
View Solution
The self-ignition Temperature of Methanol is:
TANCET - 2024
Automobile Engineering
Alternate Fuels
View Solution
The presence of oxygen in vegetable oils:
TANCET - 2024
Automobile Engineering
Alternate Fuels
View Solution
Micro explosion occurs at the temperature of about:
TANCET - 2024
Automobile Engineering
Alternate Fuels
View Solution
Hydrogen Induction in diesel engine will:
TANCET - 2024
Automobile Engineering
Alternate Fuels
View Solution
View More Questions
Questions Asked in TANCET exam
The faces in a tetragon are
TANCET - 2024
Crystallography
View Solution
What letter replaces the question mark?
TANCET - 2024
Series
View Solution
What is in this sequence? Y, V, S, P, ___
TANCET - 2024
Series
View Solution
An intermediate shaft of a gearbox, supporting two spur gears A and B and mounted between two bearings C1 and C2, is shown in the below figure. The pitch circle diameters of gears A and B are 500 and 250 mm respectively. The shaft is made of alloy steel 20MnCr5. (\( S_{ut} = 620 \) and \( S_{yt} = 480 \) N/mm\(^2\)). The factors \( k_b \) and \( k_t \) of the ASME code are 2 and 1.5 respectively. The gears are keyed to the shaft. Determine the shaft diameter using the ASME code.
TANCET - 2024
Machine Design
View Solution
A train moving at 108 km/hr crosses a platform in 30 seconds. Then it crosses a man running at 12 km/hr in the same direction in 9 seconds. What is the length of train and platform in m?
TANCET - 2024
Time, Speed and Distance
View Solution
View More Questions