Step 1: Static stability condition.
For an aircraft to be longitudinally statically stable, a small increase in angle of attack (\(\alpha\)) should produce a restoring (nose–down) moment.
- Nose–up moment is defined as positive.
- Hence, with increasing \(\alpha\), \(C_m\) must decrease.
\[
\frac{\partial C_m}{\partial \alpha} < 0
\]
Step 2: Graphical requirement.
The slope of \(C_m\) vs \(\alpha\) should be negative.
That eliminates (A) and (C), because both have positive slope.
Step 3: Distinguish between (B) and (D).
For a real aircraft:
- At \(\alpha = 0\), \(C_m\) is typically not zero; it has a negative (nose–down) or slightly negative constant trim moment to balance lift.
- To trim at some positive \(\alpha\), the line should cross zero at a finite \(\alpha\).
- This corresponds to a line with negative slope and an intercept above the origin.
Option (D) matches this condition.
Final Answer:
\[
\boxed{\text{(D) Negative slope with intercept above origin}}
\]
While taking off, the net external force acting on an airplane during the ground roll segment can be assumed to be constant. The airplane starts from rest. \( S_{LO} \) and \( V_{LO} \) are the ground roll distance and the lift-off speed, respectively. \( \alpha V_{LO} \) (\( \alpha>0 \)) denotes the airplane speed at 0.5 \( S_{LO} \). Neglecting changes in the airplane mass during the ground roll segment, the value of \( \alpha \) is _________ (rounded off to two decimal places).
A jet-powered airplane is steadily climbing at a rate of 10 m/s. The air density is 0.8 kg/m³, and the thrust force is aligned with the flight path. Using the information provided in the table below, the airplane’s thrust to weight ratio is __________ (rounded off to one decimal place).
In the given figure, the numbers associated with the rectangle, triangle, and ellipse are 1, 2, and 3, respectively. Which one among the given options is the most appropriate combination of \( P \), \( Q \), and \( R \)?
The equation of a closed curve in two-dimensional polar coordinates is given by \( r = \frac{2}{\sqrt{\pi}} (1 - \sin \theta) \). The area enclosed by the curve is ___________ (answer in integer).
For a three-bar truss loaded as shown in the figure, the magnitude of the force in the horizontal member AB is ____________ N (answer in integer).
A 4 × 4 digital image has pixel intensities (U) as shown in the figure. The number of pixels with \( U \leq 4 \) is:
Column-I has statements made by Shanthala; and, Column-II has responses given by Kanishk.