Question:

Decomposition of $H_2O_2$ follows a first order reaction. In fifty minutes the concentration of $H_2O_2$ decreases from $0.5$ to $0.125 \,M$ in one such decomposition. When the concentration of $H_2O_2$ reaches $0.05 \,M$, the rate of formation of $O_2$ will be :

Updated On: Sep 24, 2024
  • $6.93 \times 10^{-2} \,mol \, min^{-1}$
  • $6.93 \times 10^{-4} \,mol \, min^{-1}$
  • $2.66 \,L \, min^{-1} $ at $STP$
  • $1.34 \times 10^{-2} mol \, min^{-1}$
Hide Solution
collegedunia
Verified By Collegedunia

The Correct Option is B

Approach Solution - 1

$t_{3/4} = 2 \times t_{1/2} = 50 \min$

i.e. $ t_{1/2} = 25 \min $
$k = \frac{0.693}{t_{1/2}} = \frac{0.693}{25} \min^{-1} $

Rate of $H_2O_2$ decomposition $= k[H_{2}O_{2}] $
$= \frac{0.693}{25} \times0.05 = - \frac{d\left[H_{2}O_{2}\right]}{dt} $
$H _{2} O _{2} \longrightarrow H _{2} O +\frac{1}{2} O _{2}$
$ - \frac{d\left[H_{2}O_{2}\right]}{dt} = 2 \frac{d\left[O_{2}\right]}{dt}$
$ \Rightarrow \frac{d\left[O_{2}\right]}{dt} = 6.93 \times10^{-4} \text{mol} \min^{-1} $
Was this answer helpful?
0
0
Hide Solution
collegedunia
Verified By Collegedunia

Approach Solution -2

The decaying at an exponential rate, such as the radioactivity and some of the chemical reactions shows first order kinetics. 

So, In first order kinetics, the amount of material decaying in the given period of time is directly proportional to amount of material remaining. 

Hence, this can be represented as a differential equation \(\frac{dA}{dt}=-kt\)

So, here \(\frac{dA}{dt}\) is the rate per unit at which the quantity of material is increasing, t is the time, k is the constant and the minus sign indicates that the material remaining will be decreasing with time. 

So the formula for the first order kinetics is: k=\(\frac{2.303}{t}log\frac{a}{a-x}\) 

Here the given values are as follows: 

t = 50min 

a = 0.5M 

a−x = 0.125M 

After putting the given values in the first order equation we get, 

\(\frac{2.303}{50}log\frac{0.5}{0.125}=0.0277min^{-1}\)

So now, the balanced decomposition reaction of H2O2 is given as follows: 2H2O2→2H2O+O2 

Therefore, the Rate expression for this reaction will be 

\(-\frac{1}{2}\frac{dH_{2}O_{2}}{dt}=\frac{1}{2}\frac{d[H_{2}O]}{dt}=\frac{d[O_{2}]}{dt}\) 

Hence as per the differential rate expression of first order kinetics, \( -\frac{d[H_{2}O_{2}]}{dt}\) = \(k[H_{2}O_{2}]\)

As, we need the amount of the oxygen, So, therefore we by combining both above equation then we get, 

\(\frac{d[O_{2}]}{dt}= -\frac{1}{2}\frac{d[H_{2}O_{2}]}{dt}=\frac{1}{2} k[H_{2}O_{2}]\)

Therefore, When the concentration of the H2O2 reach around 0.05M,\(\frac{d[O_{2}]}{dt}\) = \(\frac{1}{2}\times0.0277\times0.05\)

So, after calculation is done we will have \(\frac{d[O_{2}]}{dt}\) = \(6.93\times 10^{-4}molmin^{-1}\) 

Therefore the correct option will be B. \(6.93\times 10^{-4}molmin^{-1}\)

 

Was this answer helpful?
0
0

Concepts Used:

Chemical Kinetics

Chemical kinetics is the description of the rate of a chemical reaction. This is the rate at which the reactants are transformed into products. This may take place by abiotic or by biological systems, such as microbial metabolism.

Rate of a Chemical Reaction:

The speed of a reaction or the rate of a reaction can be defined as the change in concentration of a reactant or product in unit time. To be more specific, it can be expressed in terms of: (i) the rate of decrease in the concentration of any one of the reactants, or (ii) the rate of increase in concentration of any one of the products. Consider a hypothetical reaction, assuming that the volume of the system remains constant. R → P

Read More: Chemical Kinetics MCQ

Factors Affecting The Reaction Rate:

  • The concentration of Reactants - According to collision theory, which is discussed later, reactant molecules collide with each other to form products.
  • Nature of the Reactants - The reaction rate also depends on the types of substances that are reacting.
  • Physical State of Reactants - The physical state of a reactant whether it is solid, liquid, or gas can greatly affect the rate of change.
  • Surface Area of Reactants - When two or more reactants are in the same phase of fluid, their particles collide more often than when either or both are in the solid phase or when they are in a heterogeneous mixture. In a heterogeneous medium, the collision between the particles occurs at an interface between phases. Compared to the homogeneous case, the number of collisions between reactants per unit time is significantly reduced, and so is the reaction rate.
  • Temperature - If the temperature is increased, the number of collisions between reactant molecules per second. Increases, thereby increasing the rate of the reaction.
  • Effect Of Solvent - The nature of the solvent also depends on the reaction rate of the solute particles.
  • Catalyst - Catalysts alter the rate of the reaction by changing the reaction mechanism.