Question:
An X-ray beam of initial intensity I0 of 70 keV imaging the chest is assumed to undergo attenuation through the muscle tissue for a thickness of 16 cm and further through the bone tissue for a thickness of 4 cm. The half value layer (HVL) thicknesses for the muscle and bone are 3.5 cm and 1.8 cm, respectively. The percentage of X-ray intensity transmitted through the body is ________.
Give your answer rounded off to 2 decimal places.
An X-ray beam of initial intensity I0 of 70 keV imaging the chest is assumed to undergo attenuation through the muscle tissue for a thickness of 16 cm and further through the bone tissue for a thickness of 4 cm. The half value layer (HVL) thicknesses for the muscle and bone are 3.5 cm and 1.8 cm, respectively. The percentage of X-ray intensity transmitted through the body is ________.
Give your answer rounded off to 2 decimal places.
Give your answer rounded off to 2 decimal places.
Updated On: Jul 17, 2024
Hide Solution
Verified By Collegedunia
Correct Answer: 0.89
Solution and Explanation
The correct answer is 0.89 to 1.00 (approx)
Was this answer helpful?
0
0
Top Questions on X Rays and the Ordering of the Elements
- The X-ray attenuation coefficients as a function of photon energy for three materials are shown in the figure below. A tissue phantom containing these three materials is imaged at two different X-ray photon energies of 50 keV and 150 keV. When the developed X-ray film is viewed, which of the following statements is/are TRUE ?
- GATE BM - 2024
- Medical Imaging Systems
- X Rays and the Ordering of the Elements
- Which one of the following events is NOT typically encountered in diagnostic X-ray projection radiography ?
- GATE BM - 2024
- Medical Imaging Systems
- X Rays and the Ordering of the Elements
- If accelerating voltage of X-ray tube is 13 kV find minimum wavelength of X-ray,
- JIPMER MBBS - 2018
- Physics
- X Rays and the Ordering of the Elements
Questions Asked in GATE BM exam
- The equivalent impedance, ZAB, in the circuit given below is ________ Ω. Give your answer rounded off to one decimal place.
- GATE BM - 2024
- An Electric Circuit
- The approximate total cross sectional areas of various types of blood vessels are given below. It was estimated that the velocity of blood in the aorta is 30 cms-1. The time it will take for the blood to travel through a capillary of length 0.5 mm is_______ seconds. Give your answer rounded off to two decimal places.
Vessel Type Approximate total cross sectional area (cm2) Aorta 4.5 Artery 20 Arteriole 400 Capillary 4500 Venule 40 Vein 15 - GATE BM - 2024
- Cardiovascular system
- A person creates an apparatus as shown in the figure to exercise the extensor muscle of the hand. It is given that OP = 0.15 m, OQ = 0.35 m, θ = 30°, the weight of the lower arm = 20 N, the center of mass of the lower arm is at point P, the magnitude of the applied tensile force F = 50 N. If the extensor muscle is acting with a moment arm of 0.25 m, the muscle force required to hold the hand at the position shown in the figure is ______ N. Give your answer rounded off to the nearest integer.
- A bio-potential signal of 4 mV on the skin surface was fed to an amplifier with a differential gain of 2000. The noise in the signal is 1000 mV. If the amplifier output produces a noise output of 200 mV, the common mode rejection ratio of the amplifier is ________ dB. Give your answer rounded to the nearest integer.
- GATE BM - 2024
- Central Nervous system
- In a motor nerve conduction velocity experiment, the distance between the distal and the recording sites is 4 cm and the distance between the proximal and the recording sites is 24 cm. The distal and proximal latencies were recorded as 6 ms and 10 ms, respectively. The nerve conduction velocity is ________ meters per second. Give your answer rounded off to the nearest integer.
- GATE BM - 2024
- Central Nervous system
View More Questions