A thin ring of mass 2 kg and radius 0.5 m is rolling without slipping on a horizontal plane with velocity 1 m/s. A small ball of mass 0.1 kg, moving with velocity 20 m/s in the opposite direction, hits the ring at a height of 0.75 m and goes vertically up with velocity 10 m/s. Immediately after the collision
the ring has pure rotation about its stationary CM
the ring comes to a complete stop
friction between the ring and the ground is to the left
there is no friction between the ring and the ground
Hide Solution
Verified By Collegedunia
The Correct Option isC
Solution and Explanation
The data is incomplete. Let us assume that friction from ground on ring is not impulsive during impact. From linear momentum conservation in horizontal direction, we have $(-2\times1)+(0.1\times20)$ $(0.1\times0)+(2\times v)$ Here, v is the velocity of CM of ring after impact. Solving the above equation, we have v = 0 Thus CM becomes stationary. $\therefore$ Correct option is (a). Linear impulse during impact (i) In horizontal direction $J_1=?p=0.1\times20=2N-s$ (ii) In vertical direction $J_2=?p=0.1\times10=1N-s$ Writing the equation (about CM) Angular impulse = Change in angular momentum We have, $1\times\bigg(\frac{\sqrt3}{2}\times\frac{1}{2}\bigg)-2\times0.5\times\frac{1}{2}=2\times(0.5)^2\bigg[?-\frac{1}{0.5}\bigg]$ Solving this equation co comes out to be positive or $?$ anti-clockwise. So just after collision rightwards slipping is taking place. Hence, friction is leftwards. Therefore, option (c) is also correct.
Was this answer helpful?
0
0
Top Questions on System of Particles & Rotational Motion
The system of particles refers to the extended body which is considered a rigid body most of the time for simple or easy understanding. A rigid body is a body with a perfectly definite and unchangeable shape.
The distance between the pair of particles in such a body does not replace or alter. Rotational motion can be described as the motion of a rigid body originates in such a manner that all of its particles move in a circle about an axis with a common angular velocity.
The few common examples of rotational motion are the motion of the blade of a windmill and periodic motion.