A logic gate circuit has two inputs A and B and output Y. The voltage waveforms of A, B and Y are shown below.
Fig. Logic gate circuit
The logic gate circuit is :
A logic gate circuit has two inputs A and B and output Y. The voltage waveforms of A, B and Y are shown below.
The logic gate circuit is :
- AND gate
- OR gate
- NOR gate
- NAND gate
The Correct Option is A
Approach Solution - 1
To determine the logic gate circuit, we need to analyze the given voltage waveforms for inputs A, B, and output Y:
Fig. Logic gate circuit
From the waveform:
- Observe when both inputs A and B are high (1), the output Y is also high (1).
- When either A or B is low (0), the output Y is low (0).
This behavior is consistent with an AND gate, which outputs high only when all its inputs are high.
Verification Against Options:
- AND gate: Matches the observed behavior (correct).
- OR gate: Would output high if any input is high (does not match).
- NOR gate: Inverse of OR gate, would output low if any input is high (does not match).
- NAND gate: Inverse of AND gate, would output low only if all inputs are high (does not match).
Therefore, the logic gate circuit is indeed an AND gate.
Approach Solution -2
The correct answer is (A) : AND gate
On the basis of given graph, following table is possible.
| A | B | C |
| 0 | 0 | 0 |
| 1 | 1 | 1 |
| 0 | 1 | 0 |
| 1 | 0 | 0 |
From waveforms and above table, it is an AND gate.
Top Questions on Logic gates
- For the given logic gate, find the output function.
- JEE Main - 2026
- Physics
- Logic gates
- Which logic gate is given in the figure?
- JEE Main - 2026
- Physics
- Logic gates
- In the figure the LED will glow for input \(A,B,C,D\) (\(0\) is low potential and \(1\) is high potential).
- JEE Main - 2026
- Physics
- Logic gates
- Let \( p \) and \( q \) be any two propositions. Consider the following propositional statements.
S1: \( p \rightarrow q \), S2: \( \neg p \land q \), S3: \( \neg p \lor q \), S4: \( \neg p \lor \neg q \)
where \( \land \) denotes conjunction (AND operation), \( \lor \) denotes disjunction (OR operation), and \( \neg \) denotes negation (NOT operation).
(Note: \( \equiv \) denotes logical equivalence)
Which one of the following options is correct? Which of the following circuits has the same output as that of the given circuit?
- JEE Main - 2025
- Physics
- Logic gates
Questions Asked in JEE Main exam
The equivalent resistance between the points \(A\) and \(B\) in the given circuit is \[ \frac{x}{5}\,\Omega. \] Find the value of \(x\).
- JEE Main - 2026
- Current electricity
Method used for separation of mixture of products (B and C) obtained in the following reaction is:
- JEE Main - 2026
- p -Block Elements
- Consider light travelling from a medium A to medium B separated by a plane interface. If the light undergoes total internal reflection during its travel from medium A to B and the speed of light in media A and B are \(2.4 \times 10^8\) m/s and \(2.7 \times 10^8\) m/s, respectively, then the value of critical angle is :
- JEE Main - 2026
- Newtons Laws of Motion
In the following \(p\text{–}V\) diagram, the equation of state along the curved path is given by \[ (V-2)^2 = 4ap, \] where \(a\) is a constant. The total work done in the closed path is:
- JEE Main - 2026
- Thermodynamics
Let \( ABC \) be a triangle. Consider four points \( p_1, p_2, p_3, p_4 \) on the side \( AB \), five points \( p_5, p_6, p_7, p_8, p_9 \) on the side \( BC \), and four points \( p_{10}, p_{11}, p_{12}, p_{13} \) on the side \( AC \). None of these points is a vertex of the triangle \( ABC \). Then the total number of pentagons that can be formed by taking all the vertices from the points \( p_1, p_2, \ldots, p_{13} \) is ___________.
- JEE Main - 2026
- Coordinate Geometry
Concepts Used:
Logic Gates
AND Gate
It is the gate, where a circuit performs an AND operation. It has n number of input where (n >= 2) and one output.
OR Gate
It is the gate, where a circuit performs an OR operation. It has n number of input where (n >= 2) and one output.
NOT Gate
An inverter is also called NOT Gate. It has one input and one output where the input is A and the output is Y.
NAND Gate
A NAND operation is also called a NOT-AND operation. It has n number of input where (n >= 2) and one output.
NOR Gate
A NOR operation is also called a NOT-OR operation. It has n number of input where (n >= 2) and one output.
XOR Gate
XOR or Ex-OR gate is a specific type of gate that can be used in the half adder, full adder, and subtractor.
XNOR Gate
XNOR gate is a specific type of gate, which can be used in the half adder, full adder, and subtractor. The exclusive-NOR gate is flattened as an EX-NOR gate or sometimes as an X-NOR gate. It has n number of input (n >= 2) and one output.