List of top Physics Questions asked in NEET (UG)

A body initially at rest and sliding along a frictionless track from a height h (as shown in the figure) just completes a vertical circle of diameter AB = D. The height h is equal to

Which one of the following statements is incorrect ?

An electron falls from rest through a vertical distance h in a uniform and vertically upward directed electric field E. The direction of electric field is now reversed, keeping its magnitude the same. A proton is allowed to fall from rest in it through the same vertical distance h. The time of fall of the electron, in comparison to the time of fall of the proton is

A toy car with charge q moves on a frictionless horizontal plane surface under the influence of a uniform electric field \(\overrightarrow{E}\) . Due to the force q\(\overrightarrow{E}\), its velocity increases from 0 to 6 m/s in one second duration. At that instant the direction of the field is reversed. The car continues to move for two more seconds under the influence of this field. The average velocity and the average speed of the toy car between 0 to 3 seconds are respectively

The moment of the force, \(\overrightarrow{F}=4\hat{i}+5\hat{j}-6\hat{k}\) at (2, 0, -3), about the point (2, -2, -2), is given by

A double inclined plane as shown in the figure has fixed horizontal base and smooth faces with the same angle of inclination of $30^{\circ}$. A block of mass $300\, g$ is on one face and is connected by a cord passing over a frictionless pulley to a second block of mass $200\, g$ kept on another face. The acceleration with which the system of the blocks moves is w.... \% of acceleration due to gravity.

A carbon resistor of (47 ± 4.7) kΩ is to be marked with rings of different colours for its identification. The colour code sequence will be

A bar AB of weight W rests like a ladder with upper end A against a smooth vertical wall and the lower end B on a rough horizontal plane. If the bar is just on the point of sliding, then the reaction at A is equal to (given that $\mu$ is coefficient of friction) :

An electron of mass m with an initial velocity \(\overrightarrow{V} = V_0 \hat{i} (V_0 \gt 0)\) enters an electric field \(\overrightarrow{E} = -E_0 \;\hat{i} (E_0=constant  \gt 0)\) at t = 0. If \(\lambda_0\) is its de-Broglie wavelength initially, then its de-Broglie wavelength at time t is

A metallic rod of mass per unit length 0.5 kg m^-1 is lying horizontally on a smooth inclined plane which makes an angle of 30° with the horizontal. The rod is not allowed to slide down by flowing a current through it when a magnetic field of induction 0.25 T is acting on it in the vertical direction. The current flowing in the rod to keep it stationary is

In the combination of the following gates the output Y can be written in terms of inputs A and B as

For a radioactive material, half-life is 10 minutes. If initially there are 600 number of nuclei, the time taken (in minutes) for the disintegration of 450 nuclei is

An object is placed at a distance of 40 cm from a concave mirror of focal length 15 cm. If the object is displaced through a distance of 20 cm towards the mirror, the displacement of the image will be

Unpolarised light is incident from air on a plane surface of a material of refractive index ‘μ’. At a particular angle of incidence ‘i’, it is found that the reflected and refracted rays are perpendicular to each other. Which of the following options is correct for this situation ?

An astronomical refracting telescope will have large angular magnification and high angular resolution, when it has an objective lens of

Current sensitivity of a moving coil galvanometer is 5 div/mA and its voltage sensitivity (angular deflection per unit voltage applied) is 20 div/V. The resistance of the galvanometer is

A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular scale division coincides with 25 divisions above the reference level. If screw gauge has a zero error of – 0.004 cm, the correct diameter of the ball is

In the circuit shown in the figure, the input voltage V_i is 20V, V_BE = 0 and V_CE = 0. The values of I_B , I_C and β are given by

An em wave is propagating in a medium with a velocity \(\overrightarrow{V} = V\hat{i}\) . The instantaneous oscillating electric field of this em wave is along +y axis. Then the direction of oscillating magnetic field of the em wave will be along

A sample of 0.1 g of water at 100°C and normal pressure (1.013 × 10⁵ Nm^-2 ) requires 54 cal of heat energy to convert to steam at 100°C. If the volume of the steam produced is 167.1 cc, the change in internal energy of the sample, is

At what temperature will the rms speed of oxygen molecules become just sufficient for escaping from the Earth's atmosphere ?
(Given : Mass of oxygen molecule (m) = 2.76×10^-26 kg
Boltzmann's constant k_B = 1.38×10^-23 J K^-1)

A small sphere of radius ‘r’ falls from rest in a viscous liquid. As a result, heat is produced due to viscous force. The rate of production of heat when the sphere attains its terminal velocity, is proportional to

In a p-n junction diode, change in temperature due to heating

A set of ‘n’ equal resistors, of value ‘R’ each, are connected in series to a battery of emf ‘E’ and internal resistance ‘R’. The current drawn is I. Now, the ‘n’ resistors are connected in parallel to the same battery. Then the current drawn from battery becomes 10 I. The value of ‘n’ is

The ratio of kinetic energy to the total energy of an electron in a Bohr orbit of the hydrogen atom, is