In the circuit given below, \(V_s = 50\ \text{V}\). Let the circuit reach steady state for the SPDT switch at position 1. Once the circuit is switched to position 2, the energy dissipated in the resistors is \(\underline{\hspace{1cm}}\) J (rounded off to one decimal place).
In the circuit shown below, \( R_1 = 2 \, \Omega \), \( R_2 = 1 \, \Omega \), \( L_1 = 2 \, H \), and \( L_2 = 0.5 \, H \). Which of the following describe(s) the characteristics of the circuit?
In the circuit shown below, $V_5 = 100 V$, $R_1 = 30 \Omega$, $R_2 = 60 \Omega$, $R_3 = 90 \Omega$, $R_4 = 45 \Omega$, and $R_5 = 30 \Omega$. The current flowing through resistor $R_3$ is \(\underline{\hspace{1cm}}\) A. (rounded off to two decimal places)
Three resistive loads are connected to ideal voltage and current sources as shown in the circuit below. The voltage $V_{AB}$ across the terminals A and B is equal to \(\underline{\hspace{1cm}}\) V.
