List of top Automotive Questions

In MacPherson strut suspension, the upper end of the shock absorber and the top of the coil spring are made to sit on the seat provided on the ............... .
............... leaf spring refers to a semi-elliptical spring mounted in an inverted manner and has a saddle above, forming a bow and is attached parallel to the wheel axle.
In case of commercial licence renewal, one of the documents required is ............... from the transport authority.
The gear in the steering gear box assembly not only steers the front wheels, but at the same time they can act as reduction gears, reducing steering wheel turning efforts by increasing the ............... .
Independent suspension can overcome the difficulty in the rigid suspension by making the two front wheels ............... each other.
In oscillation of sprung weight, ............... occurs by turning or driving the vehicle on a bumpy road, in which the springs on one side of the vehicle expand, while those on other side contract.
One of the two advantages of power steering system is that it reduces the number of turns of steering wheel required to move it from ............... .
It is compulsory for all motorized vehicles to have an insurance policy against third party liability, before ............... .
Excessive positive caster angle results in hard steering, causing road shocks to be felt at the ............... .
In worm and nut with re-circulating ball steering gear box, a ball nut is mounted on the ............... .
The radius of the circle on which the outside front wheel moves, when the front wheels are turned to their extreme outer position, is known as ............... radius.
A wing type Air Valve Control is provided on the top of the spark plug cleaner to control the flow of ............... during sandblast cleaning of spark plugs.
Automatic type tyre inflators are normally digital type and can be electronic pre-set type with ............... also.
Which of the following eases the drive effort in steering the vehicle?
The static balance of wheel, with the use of a sensor mounted to the spindle assembly, is measured by the ............... .
In the case of HMV (Heavy Motor Vehicle), one of the documents required for the renewal of commercial driving licence is ............... .
One of the applications of tyre inflators is that they are used in fuel retail outlets, service stations, garages and ............... .
Sometimes, in suspension system, instead of standard type of coil springs ............... type of coil springs are used in automobiles.
An air compressor, having discharge pressure of 150 psi or lesser, is classified as ............... pressure air compressor.
Typically, what is the useful life of consumer electronics?
Name the various types of measuring tools. Explain Caliper.
Rohit is shortlisted to work as a technician in an auto workshop. He has been asked to identify top five best new innovations in car safety technology in a latest model of car. He is further asked to explain in brief, the Night Vision Assist. Identify and explain in brief in place of Rohit.
Write the role of Sales or Marketing representative in Customer Sales Care.
Write the importance of measuring tools in automobile workshop.
Name various types of engine, on the basis of valve arrangement.