>
Water Resources Engineering
List of top Water Resources Engineering Questions
A new 'vertical single band' technology has been implemented for sugarcane cultivation in some areas of Punjab. Which of the following statements is/are correct about this technique
A. This technology requires 85% less seeds than traditional farming.
B. It reduces water consumption by 50%.
C. The yield almost doubles.
Select the correct answer from the options given below:
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Types of irrigation systems and methods
Which of the following term evapotranspiration stands for the ratio between marketable crop yield and water used in evaporation:
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Condensation and Evaporation
If the hydraulic conductivity is 0.2 meter/day and thickness of the aquifer is 1.5 meter, the transmissivity of the aquifer will be
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Fluid statics
Which of the following irrigation method is most suitable for undulating topography:
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Types of irrigation systems and methods
The working efficiency per day of deshi plough is
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Types of irrigation systems and methods
Which of the following statement is/are true about Syngas?
A. It is a mixture of carbon monoxide & hydrogen
B. It can be easily converted into gasoline through a process called steam
C. It is easily storable
D. It is combustible and can be used as fuel in reforming internal combustion engine.
E. Syngas has almost doubled the energy density to that of natural gas.
Choose the correct answer from the options given below
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Syngas
Under the Integrated Nutrient Management (INM) Mycorrhiza is an indispensable agricultural input. Select the correct benefits between fungus and root of the plant
A. improved supply of water and nutrients to the plants
B. Increased tolerance of plants to environment stress
C. Protect plants from soil borne pathogenic disease
D. Maintains biological health of soil
choose the correct answer from the given options below:
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Crop water requirements
Match List-I with List-II:
LIST I Type of WT
LIST II Principle of energy transmission
A
Hydrodynamic
I
Hydrostatic forces at pumps and motors transmission
B
Mechanical
II
Electromagnetic forces
C
hydrostatic
III
traction forces within friction contacts
D
Electrical
IV
Mass forces at pump and turbine
Choose the correct answer from the options given below
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Unit hydrographs
Which of the following crops are used for producing biofuels?
A. Sugarcane
B. Corn
C. Potato
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Biofuels
In a wet soil mass, air occupies one-sixth of its volume and water occupies one-third of its volume. The void ratio of the soil is
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Fluid statics
Find the ratio of moment carrying capacity of a circular beam of diameter D and square beam of size D.
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Momentum equations
Uniformity coefficient of a soil is
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Fluid statics
The critical hydraulic gradient (ic) of a soil mass of specific gravity (G) and void ratio (e) is given by
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Ground water hydrology
Equilibrium Moisture Control (EMC) is most commonly described using which of the following equation :-
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Condensation and Evaporation
A cantilever beam of T cross-section carries uniformly distributed load. Where does the maximum magnitude of the bending stress occur?
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Maximum Shear Stress Theory
The concept of sediment delivery ratio (Dr) is used to estimate the sediment yield of a watershed. The sediment delivery ratio is defined as -
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Watershed
The primary constituent of biogas is
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Biofuels
During tillage soil particles move ahead and around the moving tool as they fail in shear. Therefore, tillage is a ______ process.
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Fluid statics
The flow in open channel is said to be sub-critical if the Froude member is :
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Fluid statics
The length of hydraulic jump is roughly
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Hydrologic cycle
Match List I with List II
List I (Aquifer)
List II (Characteristic)
A.
Aquitard/Aquiclude
I.
water in the well rises above ground level and flows without pumping.
B.
Artersian well
II.
a saturated geological layer that is II. permeable enough to allow easy water flow.
C.
Flowing Arterian well
III.
Impermeable layer that restricts the movement of ground water.
D.
Aquifer
IV.
water naturally rising above the upper surface of the confined aquifer.
Choose the correct answer from the options given below :
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Ground water hydrology
In Chezy's formula
\(V=C\sqrt{rs}\)
for calculating the velocity of flow in circular sewer of diameter D running full, the value of hydraulic mean radius is
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Hydrologic cycle
In a direct shear test, the shear strength and normal stress on a dry sand sample at failure are 0.6 kg/cm
2
and 10 kg/cm
2
, respectively. The angle of internal friction of the sand will be nearly
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Maximum Shear Stress Theory
Hydrology is the study of
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Ground water hydrology
Match List I with List II
List I (Precipitation)
List II (Characteristics)
A.
Frontal Cyclonic Precipitation
I.
Striking of air masses with topographic barriers
B.
Convective Precipitation
II.
Horizontal air flow to low pressure area causing the air to lift
C.
Orographic Precipitation
III.
Lifting of one air mass over another
D.
Non-frontal cyclonic precipitation
IV.
Due to upward movement of warm air
Choose the correct answer from the options given below :
CUET (PG) - 2023
CUET (PG)
Water Resources Engineering
Precipitation
Prev
1
2
3
Next