List of top Textile Engineering and Fibre Science Questions asked in Tamil Nadu Common Entrance Test

The centrifugal force (N) acting on a material mass 2g present at the tip of a beater of radius 25 cm rotating at 600 rpm is
Select the correct match 
Core sheath yarn (i) Rotor yarn
Two yarns of count X each are doubled and plied. The ratio of resultant count of two ply yarn expressed in tex system and Ne system is_______. Neglect contraction due to twist.
A reed has 15 dents/cm, and the warp is drawn in two ends per dent. If the finished fabric is 1.4 m wide compared with 1.47 m wide in the reed, what is the finished fabric sett?
Among the following systems of drafting, the objective of which is to reduce the friction between adjacent warp ends?
What will be the loop length of the knitted fabric having course length 60 cm and wale length 80 cm and number of loops per course 40?
In Weft knitting machine, the term 'Robbing back' is
Which of the following fibers can be used for manufacturing of absorbent core based nonwoven products?
In which of the following web laying techniques, high loft structures can be produced?
The temperature of the air in melt blown process is set close to ________ of the polymer.
Which of the following Mechanical finishings is adopted to improve the lusture of bonded fabric?
The CV % of mass irregularity of yarn generally equals U % multiplied by
The U% of Single yarn is 17.3%. The expected U% of a 3 - ply yarn produced from this yarn will be
Crimp interchange is a phenomena associated with
The Air permeability of a fabric increases linearly with increase in twist factor. This is due to
Which of the following dyes are more prone to gas fading?
THPC flame retardant is produced by reaction of
Which one of the following chemicals is used as reducing agent in printing?
Which of the following Dyes are used for printing of polyester?
Which one of the following fibres is mass coloured?
Freundlich isotherm becomes Nernst isotherm when n is
Benzotriazoles is an example for
What is the effect of Mercerization process ?
The enzyme preferred for desizing is
In case of metameric samples which one of the following will be identical?