The center of a disk of radius $ r $ and mass $ m $ is attached to a spring of spring constant $ k $, inside a ring of radius $ R>r $ as shown in the figure. The other end of the spring is attached on the periphery of the ring. Both the ring and the disk are in the same vertical plane. The disk can only roll along the inside periphery of the ring, without slipping. The spring can only be stretched or compressed along the periphery of the ring, following Hooke’s law. In equilibrium, the disk is at the bottom of the ring. Assuming small displacement of the disc, the time period of oscillation of center of mass of the disk is written as $ T = \frac{2\pi}{\omega} $. The correct expression for $ \omega $ is ( $ g $ is the acceleration due to gravity):
As shown in the figures, a uniform rod $ OO' $ of length $ l $ is hinged at the point $ O $ and held in place vertically between two walls using two massless springs of the same spring constant. The springs are connected at the midpoint and at the top-end $ (O') $ of the rod, as shown in Fig. 1, and the rod is made to oscillate by a small angular displacement. The frequency of oscillation of the rod is $ f_1 $. On the other hand, if both the springs are connected at the midpoint of the rod, as shown in Fig. 2, and the rod is made to oscillate by a small angular displacement, then the frequency of oscillation is $ f_2 $. Ignoring gravity and assuming motion only in the plane of the diagram, the value of $\frac{f_1}{f_2}$ is:
In an oscillating spring mass system, a spring is connected to a box filled with sand. As the box oscillates, sand leaks slowly out of the box vertically so that the average frequency ω(t) and average amplitude A(t) of the system change with time t. Which one of the following options schematically depicts these changes correctly?
Oscillation is a process of repeating variations of any quantity or measure from its equilibrium value in time . Another definition of oscillation is a periodic variation of a matter between two values or about its central value.
The term vibration is used to describe the mechanical oscillations of an object. However, oscillations also occur in dynamic systems or more accurately in every field of science. Even our heartbeats also creates oscillations. Meanwhile, objects that move to and fro from its equilibrium position are known as oscillators.
Read More: Simple Harmonic Motion
The tides in the sea and the movement of a simple pendulum of the clock are some of the most common examples of oscillations. Some of examples of oscillations are vibrations caused by the guitar strings or the other instruments having strings are also and etc. The movements caused by oscillations are known as oscillating movements. For example, oscillating movements in a sine wave or a spring when it moves up and down.
The maximum distance covered while taking oscillations is known as the amplitude. The time taken to complete one cycle is known as the time period of the oscillation. The number of oscillating cycles completed in one second is referred to as the frequency which is the reciprocal of the time period.