What is the shape of the ILD for bending moment at point 'C' of a cantilever beam when the unit load is between C and B as shown in figure?
What is the shape of the ILD for bending moment at point 'C' of a cantilever beam when the unit load is between C and B as shown in figure?
Show Hint
The Correct Option is B
Solution and Explanation
Top Questions on Structural Mechanics
When two plates are placed end to end and are jointed by cover plates, the joint is known as ____ .
- AP PGECET - 2024
- Civil Engineering
- Structural Mechanics
- Plastic modulus for a circular section of diameter \( d \) is
- AP PGECET - 2024
- Civil Engineering
- Structural Mechanics
- Where do you provide bearing stiffeners?
- AP PGECET - 2024
- Civil Engineering
- Structural Mechanics
- Which of the following is reversible?
- AP PGECET - 2024
- Civil Engineering
- Structural Mechanics
- A beam of span \( L \) and is fixed at both ends. If that beam is subjected to a concentrated load at the middle of the span, what is the fixed end moment at the left end?
- AP PGECET - 2024
- Civil Engineering
- Structural Mechanics
Questions Asked in AP PGECET exam
The rank of matrix \(\begin{bmatrix} k & -1 & 0 \\[0.3em] 0 & k & -1 \\[0.3em] -1 & 0 & k \end{bmatrix}\) is 2, for \( k = \)
- AP PGECET - 2024
- Rank of a Matrix
If \(A = \begin{bmatrix} 4 & 2 \\[0.3em] -3 & 3 \end{bmatrix}\), then \(A^{-1} =\)
- AP PGECET - 2024
- Inverse of a Matrix
A two-port network is defined by the relation
\(\text{I}_1 = 5V_1 + 3V_2 \)
\(\text{I}_2 = 2V_1 - 7V_2 \)
The value of \( Z_{12} \) is:- AP PGECET - 2024
- Two Port Networks
An induction motor when started on load does not accelerate up to full speed but runs at \({\frac {1}{17}}\)th of the rated speed. The motor is said to be:
- AP PGECET - 2024
- Induction Motor
A 0 to 30 V voltmeter has an error of \(\pm 2\%\) of FSD. What is the range of readings if the voltage is 30V?
- AP PGECET - 2024
- Errors in Measurement