Let the equivalent EMF of the two cells be \( E \), and the equivalent internal resistance be \( r \). Since the cells are connected in parallel, the terminal voltages across both cells are equal. We can write:
\[ E_1 - I_1 r_1 = E_2 - I_2 r_2 = V \]
Where \( V \) is the terminal voltage across both cells, \( I_1 \) and \( I_2 \) are the currents through the two cells, and \( r_1 \) and \( r_2 \) are their respective internal resistances.
The total current \( I \) supplied by the equivalent cell is the sum of the currents from the two cells:
\[ I = I_1 + I_2 \]
Now, expressing the currents \( I_1 \) and \( I_2 \) in terms of the terminal voltage \( V \), we get:
\[ I_1 = \frac{E_1 - V}{r_1}, \quad I_2 = \frac{E_2 - V}{r_2} \]
Thus, the total current is:
\[ I = \frac{E_1 - V}{r_1} + \frac{E_2 - V}{r_2} \]
Now, rearrange the equation to get the total current \( I \) in terms of the terminal voltage \( V \):
\[ I = \frac{E_1}{r_1} + \frac{E_2}{r_2} - V \left( \frac{1}{r_1} + \frac{1}{r_2} \right) \]
Now, using Ohm’s law for the equivalent cell, we know that:
\[ V = E - I r \]
Substituting the expression for \( I \) into this equation:
\[ V = E - r \left( \frac{E_1}{r_1} + \frac{E_2}{r_2} - V \left( \frac{1}{r_1} + \frac{1}{r_2} \right) \right) \]
Now solve for \( E \) and \( r \), we get:
The equivalent EMF \( E \) is given by:
\[ E = \frac{\frac{E_1}{r_1} + \frac{E_2}{r_2}}{\frac{1}{r_1} + \frac{1}{r_2}} \]
The equivalent internal resistance \( r \) is given by:
\[ \frac{1}{r} = \frac{1}{r_1} + \frac{1}{r_2} \]
Thus, the equivalent internal resistance of the two cells connected in parallel is \( r = \frac{r_1 r_2}{r_1 + r_2} \).
Summary of the results:

The equivalent resistance between the points \(A\) and \(B\) in the given circuit is \[ \frac{x}{5}\,\Omega. \] Find the value of \(x\). 
A Wheatstone bridge is initially at room temperature and all arms of the bridge have same value of resistances \[ (R_1=R_2=R_3=R_4). \] When \(R_3\) resistance is heated, its resistance value increases by \(10%\). The potential difference \((V_a-V_b)\) after \(R_3\) is heated is _______ V. 
The heat generated in 1 minute between points A and B in the given circuit, when a battery of 9 V with internal resistance of 1 \(\Omega\) is connected across these points is ______ J. 
