The vernier constant of Vernier callipers is 0.1 mm and it has zero error of (–0.05) cm. While measuring diameter of a sphere, the main scale reading is 1.7 cm and coinciding vernier division is 5. The corrected diameter will be ________× 10–2 cm.
Correct Answer: 180
Solution and Explanation
The correct answer is 180
As the zero error is negative, we will add 0.05 cm to the reading
⇒ Corrected reading = 1.7 cm + 5 × 0.1 mm + 0.05 cm
= 180 × 10–2 cm
Top Questions on Units and measurement
- Four persons measure the length of a rod as 20.00 cm, 19.75 cm, 17.01 cm and 18.25 cm. The relative error in the measurement of average length of the rod is :
- JEE Main - 2026
- Physics
- Units and measurement
- When both jaws of a vernier calipers touch each other, zero mark of the vernier scale is right to the zero mark of main scale. 4th mark on vernier scale coincides with a certain mark on the main scale. While measuring the length of a cylinder, observer observes 15 divisions on main scale and 5th division of vernier scale coincides with a main scale division. Measured length of cylinder is ________ mm. (Least count of Vernier calliper = \(0.1\) mm)
- JEE Main - 2026
- Physics
- Units and measurement
- Two cars $A$ and $B$ each of mass $10^3$ kg are moving on parallel tracks separated by a distance of $10$ m, in same direction with speeds $72$ km/h and $36$ km/h. The magnitude of angular momentum of car $A$ with respect to car $B$ is _________ J.s.
- JEE Main - 2026
- Physics
- Units and measurement
- Match the column
- JEE Main - 2026
- Physics
- Units and measurement
- Time period of a spring-block system is given by \(T = 2\pi\sqrt{\dfrac{m}{k}}\). If mass of the block is given by \(m = 10\,\text{g} \pm 10\,\text{mg}\) and time period is measured using a stopwatch having least count of \(2\,\text{s}\) and was found to be \(60\,\text{s}\) for \(50\) oscillations, then find the % error in measurement of \(k\).
- JEE Main - 2026
- Physics
- Units and measurement
Questions Asked in JEE Main exam
- Identify the correct statements: The presence of –NO\(_2\) group in benzene ring A. activates the ring towards electrophilic substitutions. B. deactivates the ring towards electrophilic substitutions. C. activates the ring towards nucleophilic substitutions. D. deactivates the ring towards nucleophilic substitutions. Choose the correct answer from the options given below:
- JEE Main - 2026
- General Chemistry
- If the distances of the point \( (1,2,a) \) from the line \[ \frac{x-1}{1}=\frac{y}{2}=\frac{z-1}{1} \] along the lines \[ L_1:\ \frac{x-1}{3}=\frac{y-2}{4}=\frac{z-a}{b} \quad \text{and} \quad L_2:\ \frac{x-1}{1}=\frac{y-2}{4}=\frac{z-a}{c} \] are equal, then \( a+b+c \) is equal to:
- JEE Main - 2026
- Three Dimensional Geometry
Two circular discs of radius \(10\) cm each are joined at their centres by a rod, as shown in the figure. The length of the rod is \(30\) cm and its mass is \(600\) g. The mass of each disc is also \(600\) g. If the applied torque between the two discs is \(43\times10^{-7}\) dyne·cm, then the angular acceleration of the system about the given axis \(AB\) is ________ rad s\(^{-2}\).
- JEE Main - 2026
- Rotational motion
- In an experiment, a set of readings are obtained as follows: \[ 1.24~\text{mm},\ 1.25~\text{mm},\ 1.23~\text{mm},\ 1.21~\text{mm}. \] The expected least count of the instrument used in recording these readings is _______ mm.
- JEE Main - 2026
- General Physics
Method used for separation of mixture of products (B and C) obtained in the following reaction is:
- JEE Main - 2026
- p -Block Elements
Concepts Used:
Units and Measurement
Unit:
A unit of a physical quantity is an arbitrarily chosen standard that is broadly acknowledged by the society and in terms of which other quantities of similar nature may be measured.
Measurement:
The process of measurement is basically a comparison process. To measure a physical quantity, we have to find out how many times a standard amount of that physical quantity is present in the quantity being measured. The number thus obtained is known as the magnitude and the standard chosen is called the unit of the physical quantity.
Read More: Fundamental and Derived Units of Measurement
System of Units:
- CGS system
- FPS system
- MKS system
- SI units
Types of Units:
Fundamental Units -
The units defined for the fundamental quantities are called fundamental units.
Derived Units -
The units of all other physical quantities which are derived from the fundamental units are called the derived units.