The unit of self-inductance is
- weber ampere
- weberampere
- ohm second
- farad
The Correct Option is C
Solution and Explanation
Top Questions on Inductance
- A coil offers a resistance of 20 ohms for a direct current. If we send an alternating current through the same coil, the resistance offered by the coil to the alternating current will be:
- COMEDK UGET - 2024
- Physics
- Inductance
- The current in a coil changes steadily from 3 A to 5 A in 0.2 s when an emf of 2 $\mu$V is induced in it. The self-inductance of the coil is
- COMEDK UGET - 2024
- Physics
- Inductance
- Two coils are placed close to each other. The mutual inductance of the pair of coils depends upon:
- MHT CET - 2024
- Physics
- Inductance
- In a coil, the current changes from \( -2 \, \text{A} \) to \( +2 \, \text{A} \) in \( 0.2 \, \text{s} \) and induces an emf of \( 0.1 \, \text{V} \). The self-inductance of the coil is:
- MHT CET - 2024
- Physics
- Inductance
- An e.m.f of 5 volts is produced by a self-inductance when the current changes at a steady rate from 3A to 2A in 1 millisecond. The value of self-inductance is:
- MHT CET - 2024
- Physics
- Inductance
Questions Asked in KEAM exam
- The minimum value of \( f(x) = 7x^4 + 28x^3 + 31 \) is:
- KEAM - 2024
- Sequence and Series
A ball is projected in still air. With respect to the ball the streamlines appear as shown in the figure. If speed of air passing through the region 1 and 2 are \( v_1 \) and \( v_2 \), respectively and the respective pressures, \( P_1 \) and \( P_2 \), respectively, then
- KEAM - 2024
- Ideal gas equation
If the voltage across a bulb rated 220V – 60W drops by 1.5% of its rated value, the percentage drop in the rated value of the power is:
- The electric power delivered by a transmission cable of resistance \( R_c \) at a voltage \( V \) is \( P \). The power dissipated is
- KEAM - 2024
- Polarization by Reflection
- Mobility \( \mu \) of an electron is related to average collision time \( \tau \) as: \[ \mu = \frac{e \tau}{m} \] (where \( e \) is the electronic charge, and \( m \) is the mass of the electron)
- KEAM - 2024
- Refraction of Light
Concepts Used:
Inductance
Inductance is a key parameter in electrical and electronic circuit designs. Like resistance and capacitance, it is a basic electrical measurement that affects all circuits to some degree.
Inductance is used in many areas of electrical and electronic systems and circuits. The electronic components can be in a variety of forms and may be called by a variety of names: coils, inductors, chokes, transformers, . . . Each of these may also have a variety of different variants: with and without cores and the core materials may be of different types.
There are two ways in which inductance is used:
- Self-inductance: Self-inductance is the property of a circuit, often a coil, whereby a change in current causes a change in voltage in that circuit due to the magnetic effect of caused by the current flow. It can be seen that self-inductance applies to a single circuit - in other words it is an inductance, typically within a single coil. This effect is used in single coils or chokes.
- Mutual-inductance: Mutual inductance is an inductive effect where a change in current in one circuit causes a change in voltage across a second circuit as a result of a magnetic field that links both circuits. This effect is used in transformers.