Question:
The unit of filter medium resistance is
The unit of filter medium resistance is
Show Hint
Filter medium resistance is often expressed in terms of m–1, as it is directly related to the length and inverse of the cross-sectional area through which the fluid flows.
Updated On: June 02, 2025
- kg m–1
- m–1
- m kg–1
- kg–1
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
The resistance of a filter medium is proportional to the length and inversely proportional to the area of the medium. The unit of filter medium resistance is typically given as per meter (m–1), indicating the resistance to flow of fluid through the filter medium.
Conclusion: The correct unit for filter medium resistance is (B) m–1.
Was this answer helpful?
0
0
Top Questions on Ultrasonics
- A system has poles at 0.01 Hz, 1 Hz and 80 Hz, zeros at 5 Hz, 100 Hz, and 200 Hz. The approximate phase of the system response at 20 Hz is
The block diagram for a control system is shown below: for a unit step change in the set point, \( R(s) \), the steady-state offset in the output \( Y(s) \) is
- What is the near field length \(N\) that can be calculated from the relation (if \(D\) is the diameter of the transducer and \(\lambda\) is the wavelength of sound in the material)?
- What is the near field length \(N\) that can be calculated from the relation (if \(D\) is the diameter of the transducer and \(\lambda\) is the wavelength of sound in the material)?
Questions Asked in TANCET exam
- What letter replaces the question mark?
- An intermediate shaft of a gearbox, supporting two spur gears A and B and mounted between two bearings C1 and C2, is shown in the below figure. The pitch circle diameters of gears A and B are 500 and 250 mm respectively. The shaft is made of alloy steel 20MnCr5. (\( S_{ut} = 620 \) and \( S_{yt} = 480 \) N/mm\(^2\)). The factors \( k_b \) and \( k_t \) of the ASME code are 2 and 1.5 respectively. The gears are keyed to the shaft. Determine the shaft diameter using the ASME code.
- TANCET - 2024
- Machine Design
- A train moving at 108 km/hr crosses a platform in 30 seconds. Then it crosses a man running at 12 km/hr in the same direction in 9 seconds. What is the length of train and platform in m?
- TANCET - 2024
- Time, Speed and Distance
- The speed of a motor boat in still water is 7km/hr. If the speed of the motor boat against the stream is 5 km/hr, what is the speed of the stream?
- TANCET - 2024
- Time, Speed and Distance
A closed-loop system has the characteristic equation given by: $ s^3 + k s^2 + (k+2) s + 3 = 0 $.
For the system to be stable, the value of $ k $ is:- TANCET - 2024
- Microprocessors
View More Questions
