Question:
The shine of a mineral is known as:
The shine of a mineral is known as:
Show Hint
Lustre describes the shine of a mineral’s surface, while streak refers to the color of its powder.
Updated On: Jan 17, 2026
- Lustre
- Streak
- Tenacity
- Cleavage
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
Lustre refers to the way light interacts with the surface of a mineral, giving it its shine. It can range from metallic to non-metallic appearances, such as glassy, pearly, or silky.
Was this answer helpful?
0
0
Top Questions on Geotechnical Engineering
A hillslope is shown below. If the area over the failure plane is 50 m\(^2\) and the weight of the hillslope material (W) is 2000 tons, the Factor of Safety (FOS) for this hillslope in dry conditions is
Cohesion along failure plane = 196 kPa, Dip of failure plane = 60°, Internal friction angle = 30°, Area over failure plane = 50 m\(^2\), Weight of hillslope material = 2000 tons (Round off to two decimal places)- GATE GG - 2025
- Geology and Geophysics
- Geotechnical Engineering
- A hillslope is shown below. If the area over the failure plane is 50 m\(^2\) and the weight of the hillslope material (W) is 2000 tons, the Factor of Safety (FOS) for this hillslope in dry conditions is % Given: Cohesion along failure plane = 196 kPa, Dip of failure plane = 60°, Internal friction angle = 30°, Area over failure plane = 50 m\(^2\), Weight of hillslope material = 2000 tons (Round off to two decimal places)
- GATE GG - 2025
- Geology and Geophysics
- Geotechnical Engineering
- A sediment core of 4 cm diameter and 35.81 cm height was collected. This core had an initial weight of 1000.00 g and upon drying the sediment, the weight decreased by 133.75 g. This core has a void ratio of 0.42857, where void ratio is defined as the ratio of volume of void to the volume of solid (Vv/Vs). The average density of the sediment in the core is ________\ g/cm\(^3\).
- GATE GG - 2025
- Geology and Geophysics
- Geotechnical Engineering
- If the moist and oven dried weights of a soil sample are 100 gram and 80 gram, respectively, the moisture content of the sample on dry weight basis will be:
- CUET (PG) - 2025
- Soil Science
- Geotechnical Engineering
- In order to determine moisture content by oven drying method, the sample is kept in the oven fixed at a temperature of:
- CUET (PG) - 2025
- Soil Science
- Geotechnical Engineering
View More Questions
Questions Asked in CUET PG exam
- A bought an article at a certain price and sold it at 10% profit. B bought the same article at a price 10% lesser than A and sold it at ₹18 lesser than A. B's gain percentage in this deal is 20%. At what price B bought the article?
- CUET (PG) - 2025
- Profit and Loss
- The traffic lights at three different road crossings change after every 48 seconds, 72 seconds and 108 seconds respectively. If they all change simultaneously at 8:20:00 hours, then at what time will they again change simultaneously?
- CUET (PG) - 2025
- Quantitative Aptitude
- In terracotta which materials are mainly used to build strong clay
(A) Grog
(B) Metal
(C) Cotton
(D) Stone
Choose the correct answer from the options given below:- CUET (PG) - 2025
- Ceramics and Pottery
- Under the Protection of Women from Domestic Violence Act, 2005, the definition of "domestic relationship" includes:
- CUET (PG) - 2025
- Social Legislation
- The mezzotint method invented by Lindberg Von Sleigen is a version of:
- CUET (PG) - 2025
- Printmaking Techniques
View More Questions