Question:
The radius of mohr's circle of stress of a strained element is 20 N/mm2 and minor principle tensile stress is 10 N/mm2 the major principle stress is
The radius of mohr's circle of stress of a strained element is 20 N/mm2 and minor principle tensile stress is 10 N/mm2 the major principle stress is
Updated On: Mar 21, 2024
- 30 N/mm2
- 50 N/mm2
- 60 N/mm2
- 100 N/mm2
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
The correct option is(B): 50 N/mm2
Was this answer helpful?
0
0
Top Questions on Stress and strain
- The figure shows a thin cylindrical pressure vessel constructed by welding plates together along a line that makes an angle a = 60° with the horizontal. The closed vessel has a wall thickness of 10mm and diameter of 2m. When subjected to an internal pressure of 200 kPa, the magnitude of the normal stress acting on the weld is ____MPa (rounded off to 1 decimal place).
- GATE Metallurgy - 2024
- Applied Mechanics and Design
- Stress and strain
- A solid massless cylindrical member of 50 mm diameter is rigidly attached at one end, and is subjected to an axial force P = 100 kN and a torque T = 600 N. m at the other end as shown. Assume that the axis of the cylinder is normal to the support. Considering distortion energy theory with allowable yield stress as 300 MPa, the factor of safety in the design is _____ (rounded off to 1 decimal place).
- GATE Metallurgy - 2024
- Applied Mechanics and Design
- Stress and strain
- A three-hinge arch ABC in the form of a semi-circle is shown in the figure. The arch is in static equilibrium under vertical loads of P = 100 kN and Q = 50 kN. Neglect friction at all the hinges. The magnitude of the horizontal reaction at B is ____KN (rounded off to 1 decimal place).
- GATE Metallurgy - 2024
- Applied Mechanics and Design
- Stress and strain
- Which one of the following failure theories is the most conservative design approach against fatigue failure?
- GATE Metallurgy - 2024
- Applied Mechanics and Design
- Stress and strain
Questions Asked in CUET PG exam
- Find out the degree of the differential equation \(\frac {d^2t}{ds^2}+(\frac {dt}{ds})^2+2t=0\)
- CUET (PG) - 2023
- Differential Equations
- The surface area of the sphere x2 + y2 + z2 = 9 lying inside the cylinder x2 + y2 = 3y is
- CUET (PG) - 2023
- Surface Area of Cube, Cuboid and Cylinder
- The Ombudsman in a newspaper organisation represents the point of view of the ___.
- CUET (PG) - 2023
- Journalism
- The orthogonal trajectories of the family of curves y = \(ax^3\) is
- The minimum distance of the point (3, 4, 12) from the sphere x2 + y2 + z2 = 1 is
- CUET (PG) - 2023
- Coordinate Geometry
View More Questions